68 GMC C2500 Fender mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1987_3/4ton_chevy · 01-05-2008, 01:32 PM

Hey guys, my buddy and I are working on taking the front fenders offmy truck and i would like to know where all the mounting bolts are located on the fender for removal. I found top 2 near door and removed all the bolts from the under side in the wheel well. I also removed 2 bolts from front in grille area.

If you have any pictures of where all mounting bolts are or are good at explaining it go to town! lol

Thanks guys!

samwise68 · 01-05-2008, 03:08 PM

i know some guys on here don't like LMC, but i must admit, there are some really good pics in it.

so here's a link of the pic, showing the fender mounting, excluding the grill.

http://www.lmctruck.com/icatalog/cb/full.asp?page=23

and as far as the fenders mouting onto the grille, if i'm not mistaken, there are just two bolts on top, and two more on the bottom. there not hidden, and if you look, they should be pretty accessible.

one other thing, don't forget the two bolts that go vertically into the fender from the inner fender. they're right in the crown, if you will, of the inner fender. reach up and feel around, can't miss 'em.

and...i think that's about it.

any more questions, just ask. myself or someone else is bound to chime in.

-Sam.

1987_3/4ton_chevy · 01-05-2008, 03:57 PM

ok, we will look next time we are working on it. we will get back to you!

1987_3/4ton_chevy · 01-05-2008, 04:01 PM

How many would there be total then? Do you have a diagram?

**special-K** · 01-06-2008, 02:18 AM

28?

1987_3/4ton_chevy · 01-10-2008, 03:12 PM

We got the fender off so that is taken care of until we put it back on! Thanks for the help everyone

01-05-2008, 01:32 PM	#1
1987_3/4ton_chevy Cowboy Up Join Date: Jun 2007 Location: Mason City, Iowa Posts: 203	68 GMC C2500 Fender mounting Hey guys, my buddy and I are working on taking the front fenders offmy truck and i would like to know where all the mounting bolts are located on the fender for removal. I found top 2 near door and removed all the bolts from the under side in the wheel well. I also removed 2 bolts from front in grille area. If you have any pictures of where all mounting bolts are or are good at explaining it go to town! lol Thanks guys! __________________ 1971 chevy k10 Under the Knife Chris Cary

01-05-2008, 03:57 PM	#3
1987_3/4ton_chevy Cowboy Up Join Date: Jun 2007 Location: Mason City, Iowa Posts: 203	Re: 68 GMC C2500 Fender mounting ok, we will look next time we are working on it. we will get back to you! __________________ 1971 chevy k10 Under the Knife Chris Cary Last edited by 1987_3/4ton_chevy; 01-05-2008 at 03:58 PM.

01-05-2008, 04:01 PM	#4
1987_3/4ton_chevy Cowboy Up Join Date: Jun 2007 Location: Mason City, Iowa Posts: 203	Re: 68 GMC C2500 Fender mounting How many would there be total then? Do you have a diagram? __________________ 1971 chevy k10 Under the Knife Chris Cary

01-06-2008, 02:18 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 68 GMC C2500 Fender mounting 28? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2008, 03:12 PM	#6
1987_3/4ton_chevy Cowboy Up Join Date: Jun 2007 Location: Mason City, Iowa Posts: 203	Re: 68 GMC C2500 Fender mounting We got the fender off so that is taken care of until we put it back on! Thanks for the help everyone __________________ 1971 chevy k10 Under the Knife Chris Cary



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.