4wd Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zyggy72 · 01-17-2008, 02:13 PM

I have just completed a 2wd to 4wd conversion on a 67 chevy 1-ton truck. I used the existing 67 frame and took everything off an 87 chevy 3/4ton 4wd. Mainly I've used the brackets and crossmembers from the 87 and picked up a 78 chevy 1-ton dump for the front springs, d60 front and the matching corp 14 bolt rear. I could probably walk you through the conversion as well as give you measurements as I dont have the cab or nose on the truck.

01-17-2008, 02:13 PM	#2
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Re: 4wd Conversion I have just completed a 2wd to 4wd conversion on a 67 chevy 1-ton truck. I used the existing 67 frame and took everything off an 87 chevy 3/4ton 4wd. Mainly I've used the brackets and crossmembers from the 87 and picked up a 78 chevy 1-ton dump for the front springs, d60 front and the matching corp 14 bolt rear. I could probably walk you through the conversion as well as give you measurements as I dont have the cab or nose on the truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.