|
|
|
01-19-2008, 10:00 AM
|
#1 |
|
ASE Certified Spoon Operator
Join Date: Oct 2006
Location: Colorado Springs, CO
Posts: 157
|
Re: lifting a 67 k10
My 67 K10 had some blocks on the rear when I got it, think it's got 2 or 3 leaves in front. Not a large spring pack at all... I have heard a later model (73-8?) P/S box will bolt up with minor fab work, we'll see how that goes if I ever pick up where I left off. Also the truck had a 71 or 72 front disc axle and it looked a few inches wider than the rear. I never measured it though so it may just have been my imagination. I'm going back to the solid knuckle, the PO didn't match ratios and totally trashed the front diff. Never saw so many chunks of metal fall out of a diff cover before...
Dan
__________________
My six is bigger than your eight  67 K20 292 +.060" SM465 NP203 3.73s 86 4Runner, the daily on 31s 85 4Runner, the wheeler on 38s 92 x-cab truggy project for 2017... tons and 42s and V8 power 
|
|
|
|
01-19-2008, 10:03 AM
|
#2 | |
|
Account Suspended
Join Date: Feb 2004
Posts: 3,051
|
Re: lifting a 67 k10
Quote:
The later model front springs will bolt in. Most Chevy's are 2" wider in the front then in the rear. |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
