wiper motor replacement help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crm318 · 01-24-2008, 05:24 AM

today it was raining a bit and i turned the wipers on. they were very sluggish and they eventually quit. i suppose its time for a new wiper motor. i know how to get to it from behind the gauge cluster, but how do you get the cowl piece off to connect it to the wipers?

nyncompute · 01-24-2008, 06:08 AM

From memory:
- pull off wipers..use a wiper puller much less aggravation
- Open the doors a couple of 1/2 or 9/16 bolts to undo ..one on each side
- 6 or so small hex screws ( could be hidden by the by the rubber hood seal)
- three or four usually chrome screws at the grate area
BAM! in business

01-24-2008, 05:24 AM	#1
crm318 Alright Alright Alright Join Date: Mar 2004 Location: Midland, Texas Posts: 1,672	wiper motor replacement help today it was raining a bit and i turned the wipers on. they were very sluggish and they eventually quit. i suppose its time for a new wiper motor. i know how to get to it from behind the gauge cluster, but how do you get the cowl piece off to connect it to the wipers? __________________ 1972 Cheyenne Chevrolet red and white 357ci, Vortec heads, GM Performance high rise intake, Comp 268H .454/.454 218/218 110 LSA Quadrajet carb, Flowtech headers, 2.25 40 series HEI, Curve kit, TH 350, 3.07 gears 275/60/15s on 15x8 rallies

01-24-2008, 06:08 AM	#2
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: wiper motor replacement help From memory: - pull off wipers..use a wiper puller much less aggravation - Open the doors a couple of 1/2 or 9/16 bolts to undo ..one on each side - 6 or so small hex screws ( could be hidden by the by the rubber hood seal) - three or four usually chrome screws at the grate area BAM! in business __________________ 1972 K-10 SWB Cheyenne Last edited by nyncompute; 01-24-2008 at 06:59 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.