|
01-15-2003, 07:31 PM
|
#1 |
|
http://public.fotki.com/street
Join Date: Nov 2002
Location: Winnipeg, Canada
Posts: 169
|
front Brake Lines
Just put the spindles, steering etc from a 71 in my 64.. Now that I ran the brake lines to the rear of the control arm ( like on the 64), it doesn't look right. Did the flex brake hose from the caliper run to the front of the control arm on the 71? A picture would be nice if possible..Thanks in advance
|
|
|
|
01-15-2003, 09:21 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,715
|
Yes, the disc brake steel line went to the front of the crossmember. I bought new 71 lines when I did the disc conversion on my 70 3.4 ton. I cut the rear bracket off the donor truck and tacked it on the front to hold the rubber line. Works and looks like stock. I went down the street and checked out a neighbors 71 for correct brake line routing.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
