Which Seat???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dream68 · 01-10-2003, 02:01 PM

I will be looking for a donor bench seat for my 68 c-10 1/2 ton pretty soon. what recommendations do you guys or gals have???

dream68 · 01-10-2003, 02:05 PM

Any pics would be appreciated!!!

**Palf70Step** · 01-10-2003, 02:25 PM

You can fit just about anything in our trucks. The 88 and above full sized Chevy/GMC are alsmost a bolt in and very confortable in my book.

Mine is out of a basic 90 Chevy C1500

NSANE68!!! · 01-10-2003, 02:29 PM

Mine looked just like that, till I had it done up PIMP style.

Purs · 01-10-2003, 05:06 PM

can't say enough good things about these out of a 99 Sub

Hotrod70C10 · 01-10-2003, 07:23 PM

How is the legroom with that suburban seat?

Project1970 · 01-10-2003, 07:53 PM

I've got the second-row seats out of a '99 Sub...still haven't gotten pics but I love 'em.

Purs · 01-10-2003, 09:24 PM

I had good room with a non tilt, now with the tilt I have a ton of room. I'm 6'0 tall.

**67sss** · 01-11-2003, 12:48 AM

Hey purs, didn't see a gas cap or tank, did you move it to make the seat fit?.........

*Piston* · 01-11-2003, 01:15 AM

I've got the same seat as Purs. My tank is still in BUT you have to move the seat forward in order to raise/lower the center console. It hits the tank in the middle.

dream68 · 01-11-2003, 01:39 AM

Thanks for all the feedback guys. im putting my tank in the rear so there should be no problem with any seat..

Purs · 01-11-2003, 09:52 AM

I moved my tank so I could put my sub woofers behind the seat.

**67sss** · 01-14-2003, 10:14 PM

which type of gas tank did you use and where did you put it? how hard was it? did it interfear with your suspention?..thanks

dream68 · 01-15-2003, 03:16 PM

67sss: i have not put a tank in yet but when i do i will let you know!!!

Figment412 · 01-15-2003, 06:25 PM

I am holding out for a leather 40/20/40 out of a f250/350. I will have to look into that 99 sub seat, looks good. Do those come in leather?

oldcarbuff · 01-16-2003, 12:44 PM

I have a second row seat from a suburban in mine. It sits a little higher, but feels great. I put in an Astro van steering wheel to make a little more room to slide my leg past the wheel.

The second row seats are shorter than the fronts. The headrests just peep up into the back window (mine is a small rear window)

Has a center console with two cupholders and little thing for kleenex (which I use for my garage door opener). I have the tank still in the cab in my truck.

You can get them in leather or cloth from truckandrv.com. Mine cost $140. With the new seat, steering wheel, window regulators and rubbers (thanks GMC Paul), I feel like I am driving a late model!

No pics yet, but I'm working on it.

OCB

Dutch · 01-16-2003, 12:50 PM

I have a 2nd burb seat in leather, figment412. Bought it as a new takeout off ebay. I haven't been able to install it yet tho...Too many projects!

chevy2racr · 01-16-2003, 01:02 PM

NSane, you are a pimp man:-)

Figment412 · 01-16-2003, 05:44 PM

Quote:

Originally posted by Dutch
I have a 2nd burb seat in leather, figment412. Bought it as a new takeout off ebay. I haven't been able to install it yet tho...Too many projects!

Very cool. Does it have a fold down arm rest at all?

Project1970 · 01-16-2003, 06:26 PM

The center seat has a fold-down that doubles as center armrests and cupholders. Works really well, IMO.

01-10-2003, 02:01 PM	#1
dream68 Registered User Join Date: Dec 2002 Location: kelowna b.c. canada Posts: 75	Which Seat???? I will be looking for a donor bench seat for my 68 c-10 1/2 ton pretty soon. what recommendations do you guys or gals have??? __________________ '68 Chev C-10 '91 Western Star (workin wheels) Just an ole time truckin idiot! Jim G.

01-10-2003, 02:05 PM	#2
dream68 Registered User Join Date: Dec 2002 Location: kelowna b.c. canada Posts: 75	Any pics would be appreciated!!! __________________ '68 Chev C-10 '91 Western Star (workin wheels) Just an ole time truckin idiot! Jim G.

01-10-2003, 02:25 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	You can fit just about anything in our trucks. The 88 and above full sized Chevy/GMC are alsmost a bolt in and very confortable in my book. Mine is out of a basic 90 Chevy C1500 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-10-2003, 02:29 PM	#4
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	Mine looked just like that, till I had it done up PIMP style. Attached Images __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

01-10-2003, 05:06 PM	#5
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	can't say enough good things about these out of a 99 Sub Attached Images __________________ "Experience is what you get when you didn't get what you wanted."

01-10-2003, 07:23 PM	#6
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	How is the legroom with that suburban seat? __________________ 70' C-10 LWB Fleetside 4.5/6 drop

01-10-2003, 07:53 PM	#7
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	I've got the second-row seats out of a '99 Sub...still haven't gotten pics but I love 'em. __________________ Project1970 - LS1 Swap Complete!

01-10-2003, 09:24 PM	#8
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	I had good room with a non tilt, now with the tilt I have a ton of room. I'm 6'0 tall. __________________ "Experience is what you get when you didn't get what you wanted."

01-11-2003, 12:48 AM	#9
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	seats/gas tank Hey purs, didn't see a gas cap or tank, did you move it to make the seat fit?.........

01-11-2003, 01:15 AM	#10
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,300	I've got the same seat as Purs. My tank is still in BUT you have to move the seat forward in order to raise/lower the center console. It hits the tank in the middle. Attached Images

01-11-2003, 01:39 AM	#11
dream68 Registered User Join Date: Dec 2002 Location: kelowna b.c. canada Posts: 75	Thanks for all the feedback guys. im putting my tank in the rear so there should be no problem with any seat.. __________________ '68 Chev C-10 '91 Western Star (workin wheels) Just an ole time truckin idiot! Jim G.

01-11-2003, 09:52 AM	#12
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	I moved my tank so I could put my sub woofers behind the seat. __________________ "Experience is what you get when you didn't get what you wanted."

01-14-2003, 10:14 PM	#13
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	tank which type of gas tank did you use and where did you put it? how hard was it? did it interfear with your suspention?..thanks

01-15-2003, 03:16 PM	#14
dream68 Registered User Join Date: Dec 2002 Location: kelowna b.c. canada Posts: 75	67sss: i have not put a tank in yet but when i do i will let you know!!! __________________ '68 Chev C-10 '91 Western Star (workin wheels) Just an ole time truckin idiot! Jim G.

01-15-2003, 06:25 PM	#15
Figment412 Registered User Join Date: Dec 2002 Location: Fort Wayne, IN Posts: 108	I am holding out for a leather 40/20/40 out of a f250/350. I will have to look into that 99 sub seat, looks good. Do those come in leather? __________________ Save your money and do it right the first time. 1968 GMC short bed 1972 Cab 74 SB Chevy running gear



Register or Log In To remove these advertisements.

01-16-2003, 12:44 PM	#16
oldcarbuff Registered User Join Date: Sep 2002 Location: Muncie, IN U.S.A. Posts: 60	I have a second row seat from a suburban in mine. It sits a little higher, but feels great. I put in an Astro van steering wheel to make a little more room to slide my leg past the wheel. The second row seats are shorter than the fronts. The headrests just peep up into the back window (mine is a small rear window) Has a center console with two cupholders and little thing for kleenex (which I use for my garage door opener). I have the tank still in the cab in my truck. You can get them in leather or cloth from truckandrv.com. Mine cost $140. With the new seat, steering wheel, window regulators and rubbers (thanks GMC Paul), I feel like I am driving a late model! No pics yet, but I'm working on it. OCB

01-16-2003, 12:50 PM	#17
Dutch Registered User Join Date: Sep 2002 Location: Leipsic, OH Posts: 81	I have a 2nd burb seat in leather, figment412. Bought it as a new takeout off ebay. I haven't been able to install it yet tho...Too many projects! __________________ Dutch 1972 Super Cheyenne K20 1976 MGB 1950 Harley FL 1997 Arctic Cat ZR580 "Maybe if I had a couple less hobbies, I'd have time to enjoy one!"

01-16-2003, 01:02 PM	#18
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	NSane, you are a pimp man:-) __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

01-16-2003, 06:26 PM	#20
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	The center seat has a fold-down that doubles as center armrests and cupholders. Works really well, IMO. __________________ Project1970 - LS1 Swap Complete!

Register or Log In To remove these advertisements.