mono leafs under the rear of my c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Twisted78SS · 02-09-2008, 02:53 PM

Yes this was mock-up, no welds on the brackets and about 8 degrees off on the pinion angle..

The 60 started out as a full floater ford truck rear 77 vintage I think, I had it shortened 2 inches from my stock 12bolt, and had big ford bearing ends put on. I am running 35 spline Dutchman's with a 3.73 and Power Loc. I am using 74 Lincoln rear disc brakes w/ 11in rotors and a 5on5 bolt pattern.

Next to locate will be the shock mounts, then finalize it all and weld it in.

02-09-2008, 02:53 PM	#12
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: mono leafs under the rear of my c10 Yes this was mock-up, no welds on the brackets and about 8 degrees off on the pinion angle.. The 60 started out as a full floater ford truck rear 77 vintage I think, I had it shortened 2 inches from my stock 12bolt, and had big ford bearing ends put on. I am running 35 spline Dutchman's with a 3.73 and Power Loc. I am using 74 Lincoln rear disc brakes w/ 11in rotors and a 5on5 bolt pattern. Next to locate will be the shock mounts, then finalize it all and weld it in. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.