Stock Oil Filler Extention ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-15-2003, 10:13 PM

Can some one hopefully post some pics of an original, unmolested oil filler extention tube on a 350 V-8 motor. I have the stock filler tube extention and hopefully the correct valve cover for driver's side with disc brakes and vacumn boost assist. Valve cover has one 1 1/4" hole, smooth, round with no twist in lug notches for oil cap. It is used with a rubber grommet for the filler tube and a smaller one for the driver's side PVC. What about the passenger side? I know it needs the one small hole for the tube routed up through the breather. Is there also a larger hole for a push-in rubber based breather cap? My truck does not have original 350 motor but being 4x4 like the idea of not having to stretch so far to put in a quart of oil. Thanks for all replies and in-put.

**Ironhorse** · 01-16-2003, 06:00 PM

Anybody with a pic or original set-up info?

mtdave2 · 01-16-2003, 06:43 PM

here are a few picts.. hope you can see the oil filler

mtdave2 · 01-16-2003, 06:43 PM

another

mtdave2 · 01-16-2003, 06:44 PM

last one.. can you see it? has the orange cap on it

**Ironhorse** · 01-16-2003, 06:53 PM

Thanks for the picture of the engine compartment. Looks so much nicer and cleaner than mine. I need to do a lot of clean up, mostly the engine itself. Never paint a engine black, always looks dirty. I can pick out the left side filler and the PCV, also the air cleaner breather tube on the passenger side. Is there another breather cap or oil plug under/behind the a/c compressor? Can't tell for sure. Thanks for posting the pic.

mtdave2 · 01-16-2003, 06:56 PM

ya there is stuff on that side. there is a 2nd oil filler plug in the front, then on the back there is a hose that goes to the spacer on the carb.. here let me go take a pict

mtdave2 · 01-16-2003, 07:00 PM

here ya go

mtdave2 · 01-16-2003, 07:01 PM

one more

**Ironhorse** · 01-17-2003, 09:16 PM

Thanks for the pictures. It clears up a few questions for me. I now have one valve cover and need to find another one to be in buisiness. Thanks again for the assistance.

da-burb · 01-18-2003, 12:53 AM

I know I have a valve cover with just the single vent hole if that is the one you need. I have seen them like mtdave2's with and without the oil plug on the passenger side.

01-15-2003, 10:13 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Stock Oil Filler Extention ? Can some one hopefully post some pics of an original, unmolested oil filler extention tube on a 350 V-8 motor. I have the stock filler tube extention and hopefully the correct valve cover for driver's side with disc brakes and vacumn boost assist. Valve cover has one 1 1/4" hole, smooth, round with no twist in lug notches for oil cap. It is used with a rubber grommet for the filler tube and a smaller one for the driver's side PVC. What about the passenger side? I know it needs the one small hole for the tube routed up through the breather. Is there also a larger hole for a push-in rubber based breather cap? My truck does not have original 350 motor but being 4x4 like the idea of not having to stretch so far to put in a quart of oil. Thanks for all replies and in-put. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-16-2003, 06:00 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Anybody with a pic or original set-up info? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-16-2003, 06:43 PM	#3
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	here are a few picts.. hope you can see the oil filler Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-16-2003, 06:43 PM	#4
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	another Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-16-2003, 06:44 PM	#5
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	last one.. can you see it? has the orange cap on it Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-16-2003, 06:53 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Thanks for the picture of the engine compartment. Looks so much nicer and cleaner than mine. I need to do a lot of clean up, mostly the engine itself. Never paint a engine black, always looks dirty. I can pick out the left side filler and the PCV, also the air cleaner breather tube on the passenger side. Is there another breather cap or oil plug under/behind the a/c compressor? Can't tell for sure. Thanks for posting the pic. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-16-2003, 06:56 PM	#7
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	ya there is stuff on that side. there is a 2nd oil filler plug in the front, then on the back there is a hose that goes to the spacer on the carb.. here let me go take a pict __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-16-2003, 07:00 PM	#8
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	here ya go Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-16-2003, 07:01 PM	#9
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	one more Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-17-2003, 09:16 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Thanks for the pictures. It clears up a few questions for me. I now have one valve cover and need to find another one to be in buisiness. Thanks again for the assistance. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-18-2003, 12:53 AM	#11
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	I know I have a valve cover with just the single vent hole if that is the one you need. I have seen them like mtdave2's with and without the oil plug on the passenger side. Attached Images __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.