bed weight question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 01-17-2003, 11:27 PM

how much does a swb fleet bed side weigh? i am about to ship one and need to know for estimates on shipping cost. thanks, sean

>X< · 01-18-2003, 11:21 AM

seriously? nobody knows? i guessed 60 pounds

sakohntr · 01-18-2003, 11:27 AM

I had an nos swb shipped once from the east coast to minnesota and it cost over 200.00. It was oversize but not overweight. I even picked it up at there terminal. However i would not use yellow frieght again. It was temporarily lost and arrived a week late. Probably weights 100 lbs. good luck

>X< · 01-18-2003, 01:49 PM

thanks man

01-17-2003, 11:27 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	bed weight question how much does a swb fleet bed side weigh? i am about to ship one and need to know for estimates on shipping cost. thanks, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

01-18-2003, 11:21 AM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	seriously? nobody knows? i guessed 60 pounds __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

01-18-2003, 11:27 AM	#3
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	freight I had an nos swb shipped once from the east coast to minnesota and it cost over 200.00. It was oversize but not overweight. I even picked it up at there terminal. However i would not use yellow frieght again. It was temporarily lost and arrived a week late. Probably weights 100 lbs. good luck __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-18-2003, 01:49 PM	#4
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	thanks man __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.