Lowering springs pic...burb vs truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 02-15-2008, 09:49 AM

Quote:

Originally Posted by 1LoC10

so if you put truck springs on a panel, it would be slammed

I bet you get close to the same drop but a lot bouncier ride and any kind of load would probably get you down there.

**Tim Christian** · 02-15-2008, 11:05 AM

I have 5in truck springs in the rear by McGaughys on this burb

**Boog** · 02-15-2008, 11:19 AM

I know you are bound to carry some weight in that burb. So are they any softer than the original springs?

MrGoodpliers · 02-15-2008, 09:19 PM

I ordered 6" drop coils from ECE for my burb and when I let the jack down, there was about an inch between the rear and the frame. Sent 'em back and got airbags.

02-15-2008, 11:05 AM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Re: Lowering springs pic...burb vs truck I have 5in truck springs in the rear by McGaughys on this burb

02-15-2008, 11:19 AM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,683	Re: Lowering springs pic...burb vs truck I know you are bound to carry some weight in that burb. So are they any softer than the original springs? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-15-2008, 09:19 PM	#4
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Lowering springs pic...burb vs truck I ordered 6" drop coils from ECE for my burb and when I let the jack down, there was about an inch between the rear and the frame. Sent 'em back and got airbags. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.