Cool drawings of our trucks. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

supercheyenne · 01-18-2003, 09:10 AM

mtdave2 · 01-18-2003, 10:52 AM

thats cool as hell, id take that over any new truck, and save 20k lol

>X< · 01-18-2003, 11:18 AM

swwweeeeet, i'l look around and see if i have any cool drawings saved on computer

jay6891 · 01-18-2003, 12:21 PM

Here is the one that I like. Been staring at it for years.

Johns70 · 01-19-2003, 01:45 AM

i still have that magazine laying around too jay,i think those guys had a little foresight when they wrote that article!

jay6891 · 01-19-2003, 09:36 AM

I don't have the mag anymore. The stack was getting to big. I cut out the pic and articles that I want to do and put them in a notebook. I'm on the third book. If I do half of the things I want, truck will be bad a@@. If I remember right there was more pics of subs and blazers on that page. Post it if you can.

Brewski* · 01-19-2003, 10:54 AM

Not a drawing but a real drawing blueprint style. You can open it with MS Paint and do your own grill / lights options~!~

Crank · 01-19-2003, 04:12 PM

Well here's one I saved off this board.
Brandon

Reumster · 01-19-2003, 06:49 PM

jay6891

The drawing you posted is of the most popular 67-72 ever built the Traders Trendsetter. Simply awsome truck. One of the first with a one piece side glass.

I love that 72 4 door. Would look better without wing window. And a shortbox bed also! LOL

chevy2racr · 01-19-2003, 11:22 PM

the crew is sweet, like u said ditch the vent window and go wiht a 6ft bd.

01-18-2003, 09:10 AM	#1
supercheyenne Registered User Join Date: Dec 1999 Location: Newton, KS, U.S.A. Posts: 1,142	Cool drawings of our trucks. Attached Images

01-18-2003, 10:52 AM	#2
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	thats cool as hell, id take that over any new truck, and save 20k lol __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-18-2003, 11:18 AM	#3
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	swwweeeeet, i'l look around and see if i have any cool drawings saved on computer __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

01-18-2003, 12:21 PM	#4
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Here is the one that I like. Been staring at it for years. Attached Images __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

01-19-2003, 01:45 AM	#5
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	i still have that magazine laying around too jay,i think those guys had a little foresight when they wrote that article! __________________ 69 chevy short wide box project 70 GMC jimmy project

01-19-2003, 09:36 AM	#6
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	I don't have the mag anymore. The stack was getting to big. I cut out the pic and articles that I want to do and put them in a notebook. I'm on the third book. If I do half of the things I want, truck will be bad a@@. If I remember right there was more pics of subs and blazers on that page. Post it if you can. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

01-19-2003, 10:54 AM	#7
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Not a drawing but a real drawing blueprint style. You can open it with MS Paint and do your own grill / lights options~!~ Attached Images

01-19-2003, 04:12 PM	#8
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Well here's one I saved off this board. Brandon Attached Images

01-19-2003, 06:49 PM	#9
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	jay6891 The drawing you posted is of the most popular 67-72 ever built the Traders Trendsetter. Simply awsome truck. One of the first with a one piece side glass. I love that 72 4 door. Would look better without wing window. And a shortbox bed also! LOL __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

01-19-2003, 11:22 PM	#10
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	the crew is sweet, like u said ditch the vent window and go wiht a 6ft bd. __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.