parting out 1970 c10 long box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dukes69 · 01-17-2008, 11:38 AM

time to clean house. everything will be sold. let me know what you would like and i will give you a price.
or call lucas 507-475-1081

**phase_one** · 01-17-2008, 12:09 PM

Wish you were closer. I could use some of the larger stuff.

Guy58 · 01-17-2008, 02:34 PM

Do you have an under the bed type spare tire carrier with all the bolts, ext..?
Thanks,
Guy
87111

sandking · 01-17-2008, 03:08 PM

Are both of the door mirrors with back plates present? Shipped to 92882?

byrd · 01-17-2008, 04:48 PM

How is the inner grill? top trim on both fenders? Slightly Interested in the inner grill, but really interested in the fender top trim

byrd · 01-18-2008, 07:24 AM

Ttt

71swb4x4 · 01-18-2008, 07:40 AM

Here is what I need if you have it:

Complete air cleaner, including spacer between it and carb and the heater riser and heat riser tube
PS hoses
PS brackets
I would take a PS pump too if you needed to sell all that PS stuff complete.

71swb4x4 · 01-18-2008, 07:41 AM

On second hand, would you sell the whole truck? How much?

Old Chevy Mech · 01-18-2008, 08:03 AM

If you dont sell it all, I'm interested in the Whole grill, and the front Bumper if you are willing to ship to 06417
Thanks!

Frank

Bus Ted Knuckle · 01-18-2008, 08:36 AM

I need the upper and lower pieces of the door trim, and the lower piece from the rear wheel to the cab on the bed side. (All on the passenger side...does that matter?) how much with shipping to 71968?

josu_ito · 01-18-2008, 08:55 AM

I need the window mechanism and the open-closed door mechanism too (driver's side both). Price + ship to 92706. Thank you....send PM

byrd · 01-18-2008, 08:39 PM

Dukes69 it is kind of rude to not respond when you have been on the board twice since people have requested parts and prices.

rlm316 · 01-18-2008, 10:38 PM

If its auto, I am interested in the pointer and housing for the gear indicator. Shipping to 08098. Thanks, Lane.

clos69 · 01-19-2008, 12:13 AM

I am interested in the rear slider window...how $$$ and to ship to 76106,tx....pics also thanks

dukes69 · 01-19-2008, 12:40 AM

guy58- no spare tire stuff
sandking-only have a good drivers side $10 8.95 for shipping
byrd- fender trim is good $20+shipping grill has one piece broke out wait for pics.
71swb4x4- air cleaner $15
no spacer, heat tube $15
ps hoses, pump and the brackets that i have $30 shipping is extra let me know what you want.
old chev mec. bumper $40 no brackets shipping43.89 grill$150 shipping52.46
busted knuckle only the upper door trim is good $10 plus shipping
josu_ito-door stuff $ 40 shipped
rlm316 no pointer, indicator 7.50 shipped.

please pm if you would any of these.

71swb4x4 · 01-19-2008, 08:49 AM

PM sent on PS stuff and air cleaner stuff.

Bus Ted Knuckle · 01-19-2008, 09:05 AM

suppose I'll pass on the trim then

1971ChevyTruck · 01-19-2008, 10:06 AM

Is it automatic?? 350?? If so how much for the tranny linkage??

*1972Ryan* · 01-19-2008, 10:23 AM

What is the condition of the doors and what would it be shipped to 28787? also what about the inner fenders?
Thanks,
Ryan

rlm316 · 01-19-2008, 10:33 PM

Thanks, do you also have the fiber optic cable or is that missing/ broken.
Lane.

byrd · 01-20-2008, 11:52 AM

Sounds good, how much for shipping to 40272

clos69 · 01-22-2008, 06:49 PM

Duke-
Can you show some pics of the rear slider window and how much to ship to 76106,TX

750horsepower · 01-22-2008, 10:18 PM

how is the wiring harness i need the whole thing inside and out and how much?

9ballmasterizz · 02-21-2008, 12:18 PM

Do you have a gauge cluster with working gauges? If so, how much and how much is shipping to 74948?

01-17-2008, 11:38 AM	#1
dukes69 Junior Member Join Date: Jun 2007 Location: owatonna mn Posts: 133	parting out 1970 c10 long box time to clean house. everything will be sold. let me know what you would like and i will give you a price. or call lucas 507-475-1081 __________________ 1968 chevelle ss 396 4spd 1969 chevy 4wd 350 4spd 1970 chevy c10 long box 1970 GMC 4wd long box Last edited by dukes69; 01-17-2008 at 11:42 AM.

01-17-2008, 12:09 PM	#2
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: parting out 1970 c10 long box Wish you were closer. I could use some of the larger stuff. __________________ 11 Surbaban 70 C 10 still in progress

01-17-2008, 02:34 PM	#3
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: parting out 1970 c10 long box Do you have an under the bed type spare tire carrier with all the bolts, ext..? Thanks, Guy 87111

01-17-2008, 03:08 PM	#4
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: parting out 1970 c10 long box Are both of the door mirrors with back plates present? Shipped to 92882? __________________ . . . . . View my build thread HERE

01-18-2008, 07:40 AM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: parting out 1970 c10 long box Here is what I need if you have it: Complete air cleaner, including spacer between it and carb and the heater riser and heat riser tube PS hoses PS brackets I would take a PS pump too if you needed to sell all that PS stuff complete. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-18-2008, 07:41 AM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: parting out 1970 c10 long box On second hand, would you sell the whole truck? How much? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-18-2008, 08:03 AM	#9
Old Chevy Mech Keepin it runnin! Join Date: Oct 2007 Location: Deep River, CT Posts: 1,036	Re: parting out 1970 c10 long box If you dont sell it all, I'm interested in the Whole grill, and the front Bumper if you are willing to ship to 06417 Thanks! Frank __________________ 1970 K-5 4X4 Blazer 1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it"

01-18-2008, 08:36 AM	#10
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: parting out 1970 c10 long box I need the upper and lower pieces of the door trim, and the lower piece from the rear wheel to the cab on the bed side. (All on the passenger side...does that matter?) how much with shipping to 71968? __________________ Bill BEATERS ARE NEATER Last edited by Bus Ted Knuckle; 01-18-2008 at 08:40 AM.

01-18-2008, 08:55 AM	#11
josu_ito Registered User Join Date: Oct 2007 Location: ANAHEIM, CA Posts: 21	Re: parting out 1970 c10 long box I need the window mechanism and the open-closed door mechanism too (driver's side both). Price + ship to 92706. Thank you....send PM __________________ LIFE GOES FAST...... FIX THAT TRUCK 4x4 '70

01-18-2008, 10:38 PM	#13
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: parting out 1970 c10 long box If its auto, I am interested in the pointer and housing for the gear indicator. Shipping to 08098. Thanks, Lane.

01-19-2008, 12:13 AM	#14
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: parting out 1970 c10 long box I am interested in the rear slider window...how $$$ and to ship to 76106,tx....pics also thanks

01-19-2008, 12:40 AM	#15
dukes69 Junior Member Join Date: Jun 2007 Location: owatonna mn Posts: 133	Re: parting out 1970 c10 long box guy58- no spare tire stuff sandking-only have a good drivers side $10 8.95 for shipping byrd- fender trim is good $20+shipping grill has one piece broke out wait for pics. 71swb4x4- air cleaner $15 no spacer, heat tube $15 ps hoses, pump and the brackets that i have $30 shipping is extra let me know what you want. old chev mec. bumper $40 no brackets shipping43.89 grill$150 shipping52.46 busted knuckle only the upper door trim is good $10 plus shipping josu_ito-door stuff $ 40 shipped rlm316 no pointer, indicator 7.50 shipped. please pm if you would any of these. __________________ 1968 chevelle ss 396 4spd 1969 chevy 4wd 350 4spd 1970 chevy c10 long box 1970 GMC 4wd long box

01-19-2008, 08:49 AM	#16
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: parting out 1970 c10 long box PM sent on PS stuff and air cleaner stuff. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-19-2008, 09:05 AM	#17
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: parting out 1970 c10 long box suppose I'll pass on the trim then __________________ Bill BEATERS ARE NEATER

01-19-2008, 10:06 AM	#18
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: parting out 1970 c10 long box Is it automatic?? 350?? If so how much for the tranny linkage??



Register or Log In To remove these advertisements.

01-19-2008, 10:23 AM	#19
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: parting out 1970 c10 long box What is the condition of the doors and what would it be shipped to 28787? also what about the inner fenders? Thanks, Ryan Last edited by 1972Ryan; 01-19-2008 at 10:24 AM.

01-19-2008, 10:33 PM	#20
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: parting out 1970 c10 long box Thanks, do you also have the fiber optic cable or is that missing/ broken. Lane.

01-22-2008, 06:49 PM	#22
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: parting out 1970 c10 long box Duke- Can you show some pics of the rear slider window and how much to ship to 76106,TX

01-22-2008, 10:18 PM	#23
750horsepower Registered User Join Date: Dec 2007 Location: gravette ar Posts: 18	Re: parting out 1970 c10 long box how is the wiring harness i need the whole thing inside and out and how much?

02-21-2008, 12:18 PM	#24
9ballmasterizz Registered User Join Date: Feb 2008 Location: Muldrow, OK Posts: 20	Re: parting out 1970 c10 long box Do you have a gauge cluster with working gauges? If so, how much and how much is shipping to 74948? __________________ *The Native Caucasian* 1972 Chevy Cheyenne

Register or Log In To remove these advertisements.