Questions about Hood

[mtburg71]

Originally Posted by aggie91

From the second picture, looks like he needs to loosed the bolts that hold the hinge to the inner fender and lift them up. That sets the HEIGHT of the hood to the cowl panel.

As for the supports, don't spot weld them. Get the sponge rubber cushions for them....

Got it, don't spot weld them. I held off from doing so.

The second pic doesn't have the hood all the way shut, but when it is shut and the hinges are lifted up still have that 1/2" height difference. The only thing I didn't adjust was the hood stops closest to the cab, dunno if that will help close the gap any. Any other suggestions or recommendations. Thanks