wtt for some parts for my projects. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 02-25-2008, 07:02 AM

these parts need to be nice driver or new shape.
i need 1 or maybe 2 - 5 inch tachs perfer autogage.
1 edelbrock or weland alum intake with maybe a small high rise for 1 4 barrel carb. for street use. i will be useing these parts on a sb 400 for my 72 truck. and a sm 350 for my 72 chevelle.
i need a nice set of mag wheels 15 inch 8's or maybe 8's on ft. and 10's on the rear. perfer polished alum. but will consider others. these will need to be the small bolt pattern for the chevelle.
2 or maybe 4- 2 or 2 1/2 inch 40 series flowmasters.
i am sure i need more stuff but thats all i can think of right now.
i have lots of parts to trade.
also looking for a 5 lug pois. traction rear end coil spring would like to stay with 71 or 72 . i am going with a 400 sb eng and a 400 trans. so i would like a rear end to match them . i would like to get at least 14 to 15 mpg.

DennyB · 02-25-2008, 08:19 AM

Bill, Are you looking for a single or dual plane intake manifold?
I have an old Weiand single plane with the provision for the front oil filler tube.
It has an old black paint job on it.

LMK

Denny

billsbowtie · 02-26-2008, 07:14 AM

denny i ran into a old friend today that works at a auto parts store . he is going to give me a good deal on a new intake and tach. thanks for the reply.

DennyB · 02-26-2008, 07:55 AM

No problem.
Glad you found what you needed.

02-25-2008, 07:02 AM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	wtt for some parts for my projects. these parts need to be nice driver or new shape. i need 1 or maybe 2 - 5 inch tachs perfer autogage. 1 edelbrock or weland alum intake with maybe a small high rise for 1 4 barrel carb. for street use. i will be useing these parts on a sb 400 for my 72 truck. and a sm 350 for my 72 chevelle. i need a nice set of mag wheels 15 inch 8's or maybe 8's on ft. and 10's on the rear. perfer polished alum. but will consider others. these will need to be the small bolt pattern for the chevelle. 2 or maybe 4- 2 or 2 1/2 inch 40 series flowmasters. i am sure i need more stuff but thats all i can think of right now. i have lots of parts to trade. also looking for a 5 lug pois. traction rear end coil spring would like to stay with 71 or 72 . i am going with a 400 sb eng and a 400 trans. so i would like a rear end to match them . i would like to get at least 14 to 15 mpg. __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 02-25-2008 at 07:06 AM.

02-25-2008, 08:19 AM	#2
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: wtt for some parts for my projects. Bill, Are you looking for a single or dual plane intake manifold? I have an old Weiand single plane with the provision for the front oil filler tube. It has an old black paint job on it. LMK Denny

02-26-2008, 07:14 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: wtt for some parts for my projects. denny i ran into a old friend today that works at a auto parts store . he is going to give me a good deal on a new intake and tach. thanks for the reply. __________________ i have 67/72 chevy truck parts f/s.

02-26-2008, 07:55 AM	#4
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: wtt for some parts for my projects. No problem. Glad you found what you needed. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.