AC dash install questions

[vtblazer]

Originally Posted by Critter

So you are saying that the horizontal part of your dash where the defrost vents are remained untouched? You made your "splice" under the dash pad in other words? That doesn't sound too bad.

Correct, it's the simplest/quickest way by far.

Or you could remove the entire dash which will mandate removing all those spot welds and beware, there's alot of em.
Would also mandate removing the windshield doing it that way.

If your hoping to run factory A/C later on, the firewalls are different between A/C and non-A/C trucks also.

The simple fix there is just swap out that area of the firewall from the A/C donor truck.