700r4 lock-up question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tim64 · 03-03-2008, 02:51 AM

So the hose just hangs there? I'm sure I can make this thing work, if I have to I'll wait til Monday and call them back.
Thanks,
Tim

**ChiefRocka** · 03-03-2008, 03:23 AM

I believe that cover in under spring tension, if I rmemeber correctly.

62 short step · 03-03-2008, 03:41 AM

Quote:

Originally Posted by Tim64

So the hose just hangs there? I'm sure I can make this thing work, if I have to I'll wait til Monday and call them back.
Thanks,
Tim

I believe so. I don't have a hose on mine!

ampsyco · 03-03-2008, 03:56 AM

the hose is a vent. for fluid or air. it just kind of sits there.

shortbed70 · 03-03-2008, 09:46 PM

I am getting ready to do the same thing my trans doesdn't have the pressure port but I will be installing a sonnax servo while I'm in there. The hose is a vent take that long black extension off you don't need it and the cover comes off with a snap ring but its a pain in the ... you could put some grease on the bit and drill slow and then when you tap use grease.

03-03-2008, 02:51 AM	#1
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: 700r4 lock-up question So the hose just hangs there? I'm sure I can make this thing work, if I have to I'll wait til Monday and call them back. Thanks, Tim

03-03-2008, 03:23 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,151	Re: 700r4 lock-up question I believe that cover in under spring tension, if I rmemeber correctly. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2008, 03:56 AM	#4
ampsyco Registered User Join Date: Aug 2006 Location: florida Posts: 142	Re: 700r4 lock-up question the hose is a vent. for fluid or air. it just kind of sits there.

03-03-2008, 09:46 PM	#5
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 700r4 lock-up question I am getting ready to do the same thing my trans doesdn't have the pressure port but I will be installing a sonnax servo while I'm in there. The hose is a vent take that long black extension off you don't need it and the cover comes off with a snap ring but its a pain in the ... you could put some grease on the bit and drill slow and then when you tap use grease. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.