Need some help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Irish · 03-02-2008, 07:47 PM

Well after waiting a long time I finaly got my 20" Foose rims 10" wide for the back .
After what i thought was enough measurement investigation , they rub when I drop the truck down all the way on the bags .
I have an adjustable track /Panhard bar .Will adjusting the bar for ride hieght eliminate all the side to side movement , or just some/most . i have factory fenders and wheels tubs .
When i drop the air ride it rubs on the pass side fender lip and the driver side wheel tub .
Can anyone offer some info ?I cant drive the truck now anyway because of of winter , but what to solve . Anyone know if a watts link will "Eliminate" the side to side movement . Found one on KP Components but no contact info to get more help .
This is my first C10 67 Short Wide on bags .
Any and all help is very much appreciated . I am hoping this was not a very expensive mistake .
Thanks

redsled04 · 03-02-2008, 11:04 PM

The watts link will eliminate side to side movement. The kp one is a bolt on and works great. Ive neever had one personaly but a few of my friends have them and ive seen them work.You should be able to adjust your panhard bar to get et to work for now.But it will stil shift from side to side it dont hurt any thing if set up right to clear everything.

pissonNOS · 03-03-2008, 12:21 AM

clint from KP is a member he might see this and hel you out

Big Irish · 03-03-2008, 03:46 AM

Wow I hope Clint does see this . I could use some help .
I appreciate the input and help this is a great community .

03-02-2008, 07:47 PM	#1
Big Irish Registered User Join Date: Feb 2008 Location: Toronto Ontario Posts: 110	Need some help please Well after waiting a long time I finaly got my 20" Foose rims 10" wide for the back . After what i thought was enough measurement investigation , they rub when I drop the truck down all the way on the bags . I have an adjustable track /Panhard bar .Will adjusting the bar for ride hieght eliminate all the side to side movement , or just some/most . i have factory fenders and wheels tubs . When i drop the air ride it rubs on the pass side fender lip and the driver side wheel tub . Can anyone offer some info ?I cant drive the truck now anyway because of of winter , but what to solve . Anyone know if a watts link will "Eliminate" the side to side movement . Found one on KP Components but no contact info to get more help . This is my first C10 67 Short Wide on bags . Any and all help is very much appreciated . I am hoping this was not a very expensive mistake . Thanks __________________ 1955 Chevy 2 door Wagon 1967 Short Wide BAGGED Gone to someone else 1953 Shop truck Clipped and Snipped sold 1951 GMC Bagged and patina

03-02-2008, 11:04 PM	#2
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: Need some help please The watts link will eliminate side to side movement. The kp one is a bolt on and works great. Ive neever had one personaly but a few of my friends have them and ive seen them work.You should be able to adjust your panhard bar to get et to work for now.But it will stil shift from side to side it dont hurt any thing if set up right to clear everything.

03-03-2008, 12:21 AM	#3
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: Need some help please clint from KP is a member he might see this and hel you out __________________ 69 GMC bagged

03-03-2008, 03:46 AM	#4
Big Irish Registered User Join Date: Feb 2008 Location: Toronto Ontario Posts: 110	Re: Need some help please Wow I hope Clint does see this . I could use some help . I appreciate the input and help this is a great community . __________________ 1955 Chevy 2 door Wagon 1967 Short Wide BAGGED Gone to someone else 1953 Shop truck Clipped and Snipped sold 1951 GMC Bagged and patina



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.