|
03-06-2008, 10:33 PM
|
#1 |
|
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Van tilt question
What intermidiate shaft do I need for the van tilt conversion on a 67' ? It has a small spline type end to the van tilt .
|
|
|
|
03-07-2008, 12:00 AM
|
#2 |
|
Registered User
Join Date: May 2006
Location: Columbia, MO
Posts: 16
|
Re: Van tilt question
I bought a "van tilt" at a swap meet and it just bolted right up to my existing shaft. Hope this helps. I did have to compress it a little. But it just went right in after that.
|
|
|
|
|
03-07-2008, 01:24 AM
|
#3 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: Van tilt question
Click the FAQ Index link in my sig for a complete write-up on what you need to do the conversion.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
03-07-2008, 02:19 AM
|
#4 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Van tilt question
you'll need to locate a 69 - 72 truck in a junk yard and when you pop the hood you'll see it. It bolts to the column, and then to the steering gear box. 67 and some 68's don't have this.
|
|
|
|
|
03-07-2008, 03:04 AM
|
#5 |
|
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Re: Van tilt question
I read through the FAQ section and wasn't able to find the info I needed . I did the inside part of the conversion to a 68' and had to sell it before I finished it . The van has 36 spline . and my original 68' shaft I believe had a D style . So 69-72 intermediate shaft is what I need ? I bought one at the swap meet this week end and it had a splined end , but was the incorrect shaft diameter . I'm Just looking for a little extra info , not a collection of incorrect shafts .
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
