Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-07-2008, 11:07 PM | #1 |
Registered User
Join Date: Nov 2007
Location: Hewitt Minnesota
Posts: 92
|
Need suggestions/reccomendations
I need some ideas on how to "tinker" with the truck mentioned below. For this I have a budget of $2,000, not counting labor (where applicable)
I have a 76 C20 with a good running(stock) 350 I have only two requirements. The frame and suspension are off limits. no lifting or lowering and keep the shinny stuff(chrome) to a minimum. |
03-07-2008, 11:50 PM | #2 |
Registered User
Join Date: Jan 2008
Location: Groves,TX
Posts: 483
|
Re: Need suggestions/reccomendations
Get A Matched Intake Cam Combo From Edelbrock(PERFORMER, POWER RANGE FROM IDLE-5,OOO RPM), Paint The Intake To Match Your Block. Get A Good Free Flowing Exhaust(headers If You Want, But Get A Good Set With Atleast 3/8" Flanges) Get A Hei Super Coil From Accel And A Good Set Of Plug Wires. Fix Any Problems You Have With The Truck.
Last edited by slug; 03-07-2008 at 11:51 PM. |
03-08-2008, 07:53 AM | #3 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,313
|
Re: Need suggestions/reccomendations
well what size trans? id say maybe a good set of used headers with dual exhausts a shift kit in the trans and possibly the manifold carb
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
03-08-2008, 08:23 AM | #4 |
Registered User
Join Date: Nov 2007
Location: Hewitt Minnesota
Posts: 92
|
Re: Need suggestions/reccomendations
|
03-08-2008, 09:43 AM | #5 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,313
|
Re: Need suggestions/reccomendations
the shft kit helps with the trans if you do towing id throw in a trans cooler too
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
Bookmarks |
|
|