Clarification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1972Ryan* · 03-08-2008, 06:10 AM

Ok, I know that the deluxe trim windshield gaskets for 69-70 and 71-72 are different due to groove depth, but is the trim that goes in them the same? If so, can I use a 71-72 gasket on my 70? Just wondering what the difference was and if they are interchangeable.

*1972Ryan* · 03-08-2008, 08:07 AM

ttt

Down south truckin · 03-08-2008, 08:10 AM

Ryan the trim will not work you must buy the correct rubber/moulding I may have some if you need the correct ones thanks Mike

Solver · 03-08-2008, 09:44 AM

The windshield molding/rubber groove is deeper for the pre 71 stainless trim . The groove is for the trim not the truck or windshield. If you have 71-72 stainless trim and rubber for 71-72 you can mount it in pre 71 truck. The rubber molding corresponds to the trim used.

centsless · 03-08-2008, 09:59 AM

I had a new aftermarket rubber for mine and used the 71-72 trim. The rubber would have worked for either set of trim, but it would not even fit around the windshield right. I had Safelite auto glass come out and they brought their own gasket and it worked fine. Solver is 100% correct in what he said, just make sure you get a good gasket, dont mess with a cheapie like I did.

*1972Ryan* · 03-08-2008, 04:06 PM

so the trim is different also for those years?

03-08-2008, 06:10 AM	#1
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Clarification Ok, I know that the deluxe trim windshield gaskets for 69-70 and 71-72 are different due to groove depth, but is the trim that goes in them the same? If so, can I use a 71-72 gasket on my 70? Just wondering what the difference was and if they are interchangeable.

03-08-2008, 08:07 AM	#2
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Clarification ttt

03-08-2008, 08:10 AM	#3
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Clarification Ryan the trim will not work you must buy the correct rubber/moulding I may have some if you need the correct ones thanks Mike

03-08-2008, 09:44 AM	#4
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Clarification The windshield molding/rubber groove is deeper for the pre 71 stainless trim . The groove is for the trim not the truck or windshield. If you have 71-72 stainless trim and rubber for 71-72 you can mount it in pre 71 truck. The rubber molding corresponds to the trim used. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

03-08-2008, 09:59 AM	#5
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Clarification I had a new aftermarket rubber for mine and used the 71-72 trim. The rubber would have worked for either set of trim, but it would not even fit around the windshield right. I had Safelite auto glass come out and they brought their own gasket and it worked fine. Solver is 100% correct in what he said, just make sure you get a good gasket, dont mess with a cheapie like I did. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

03-08-2008, 04:06 PM	#6
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: Clarification so the trim is different also for those years?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.