Napco help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 03-08-2008, 06:59 PM

I'm trying to find out if closed knuckle/drum brake Dana 44 parts will work on my Napco front axle...as far as the hubs and spindles, etc. Also trying to find out what model Warn hubs were factory options or at least some good pictures.

**special-K** · 03-08-2008, 07:47 PM

Not sure of an accurate answer,but I don`t think parts will interchange.Have you visited the Napco website with this question?I had a rare`71 Chevy C/30 with NAPCO conversion.While I went to tackle restoring the front axle I swapped in a Chevy Dana front axle.This was about 20 years ago and I scoured the states to locate the parts.When I finally got it all done I swapped the Spicer back in.Then,someone stole the truck.

pulltilbroke · 03-08-2008, 11:42 PM

there is a guy selling drivers side hub and arm on the Lincoln NE craigslist for 40$

griesel72 · 03-09-2008, 04:08 AM

Quote:

Originally Posted by special-K

Not sure of an accurate answer,but I don`t think parts will interchange.Have you visited the Napco website with this question?I had a rare`71 Chevy C/30 with NAPCO conversion.While I went to tackle restoring the front axle I swapped in a Chevy Dana front axle.This was about 20 years ago and I scoured the states to locate the parts.When I finally got it all done I swapped the Spicer back in.Then,someone stole the truck.

he was probably waiting until you got all the hard work with the front axle done before he got it, you know how hard it is to find those Napco front end parts

03-08-2008, 06:59 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Napco help I'm trying to find out if closed knuckle/drum brake Dana 44 parts will work on my Napco front axle...as far as the hubs and spindles, etc. Also trying to find out what model Warn hubs were factory options or at least some good pictures. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

03-08-2008, 07:47 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Napco help Not sure of an accurate answer,but I don`t think parts will interchange.Have you visited the Napco website with this question?I had a rare`71 Chevy C/30 with NAPCO conversion.While I went to tackle restoring the front axle I swapped in a Chevy Dana front axle.This was about 20 years ago and I scoured the states to locate the parts.When I finally got it all done I swapped the Spicer back in.Then,someone stole the truck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2008, 11:42 PM	#3
pulltilbroke Registered User Join Date: Mar 2008 Location: Eagle Ne Posts: 356	Re: Napco help there is a guy selling drivers side hub and arm on the Lincoln NE craigslist for 40$ __________________ 60 4x4,235,SM420,Rockwell T221,D44/HO33 sold 4/12 67 C-20,292,SM420,HO72 90 Dodge W250 Cummins,NV4500HD,205,D60/D80 93 Dodge W350 Dually Cummins, Getrag, 205,D60/D70 Last edited by pulltilbroke; 03-08-2008 at 11:42 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.