Good adhesive for window track? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

D-Day · 03-10-2008, 03:27 PM

Well, my window has dismounted from the track again. I pushed my luck the other night when it had ice on it, cranked too hard, and popped it off.

I've tried several adhesives in the past, what would be the strongest? A combination of stuff?

bad6772 · 03-10-2008, 03:44 PM

we use urathane at work...its for glass...its messy as he77 but seems to work..well...i think at one time we used 3m Super Black weather strip adheisive <spell...both should be left to cure over night Imo...Also there are some 2 part epoxy stuff that is very good..but most of them require a special applicator gun....Hope some of this may help you.....Tony

**old Rusty C10** · 03-10-2008, 07:28 PM

3M makes stuff for it and you can usualy find it in the auto stores like pep boys or strauss otherwise body shop suppliers have it

James McClure · 03-10-2008, 08:34 PM

3M!! Part or product # 8101 structural adhesive. It's a 2 part kit. You'll use almost the whole thing. One word of warning, GET EVERYTHING SUPER CLEAN FIRST!! Oh another thing, get it right the first time, you'll never get it off. jim

03-10-2008, 03:27 PM	#1
D-Day Live fast, die young Join Date: Sep 2006 Location: Northwest Ohio Posts: 293	Good adhesive for window track? Well, my window has dismounted from the track again. I pushed my luck the other night when it had ice on it, cranked too hard, and popped it off. I've tried several adhesives in the past, what would be the strongest? A combination of stuff?

03-10-2008, 03:44 PM	#2
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Good adhesive for window track? we use urathane at work...its for glass...its messy as he77 but seems to work..well...i think at one time we used 3m Super Black weather strip adheisive <spell...both should be left to cure over night Imo...Also there are some 2 part epoxy stuff that is very good..but most of them require a special applicator gun....Hope some of this may help you.....Tony

03-10-2008, 07:28 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: Good adhesive for window track? 3M makes stuff for it and you can usualy find it in the auto stores like pep boys or strauss otherwise body shop suppliers have it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-10-2008, 08:34 PM	#4
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Good adhesive for window track? 3M!! Part or product # 8101 structural adhesive. It's a 2 part kit. You'll use almost the whole thing. One word of warning, GET EVERYTHING SUPER CLEAN FIRST!! Oh another thing, get it right the first time, you'll never get it off. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.