LED's by Justin (big pics) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**El Jay** · 03-19-2008, 10:11 AM

Trey kewl!!!!!!!!!!!!!!

TonyJohnson · 03-19-2008, 07:45 PM

I'm really happy with mine. I ended up replacing my turn signal switch as well. It wasn't canceling properly and had some 30 year old crud issues. Justin is great and really stands behind his work. I was having the turn signal issues and wasn't sure if it was one of the LED units and Justin offered to pay my shipping to check it out. First class customer service. I ended up checking it out by switching sides and decided it was in the column. Changed the switch and everything works great. The ebay flasher works fine.

Just FYI, I decided to hardwire mine in instead of using the bulb sockets. I used spade connectors and drilled a 3/8 hole in the housing and used a grommet for the wires. They are all removable, but have really solid connections and I don't expect to have to take them off again for a long, long, time. 8^>

My lenses were kinda old and had some chips and cracks, so I replaced them, as well. The repops have a little wider flange where they mount in the housing, so you might have to trim a little to get everything to fit perfect. This is one mod I'd do again in a heartbeat. Thanks, Justin.

**Already Gone** · 03-19-2008, 10:47 PM

ttt

03-19-2008, 10:11 AM	#26
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: LED's by Justin (big pics) Trey kewl!!!!!!!!!!!!!! __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

03-19-2008, 07:45 PM	#27
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: LED's by Justin (big pics) I'm really happy with mine. I ended up replacing my turn signal switch as well. It wasn't canceling properly and had some 30 year old crud issues. Justin is great and really stands behind his work. I was having the turn signal issues and wasn't sure if it was one of the LED units and Justin offered to pay my shipping to check it out. First class customer service. I ended up checking it out by switching sides and decided it was in the column. Changed the switch and everything works great. The ebay flasher works fine. Just FYI, I decided to hardwire mine in instead of using the bulb sockets. I used spade connectors and drilled a 3/8 hole in the housing and used a grommet for the wires. They are all removable, but have really solid connections and I don't expect to have to take them off again for a long, long, time. 8^> My lenses were kinda old and had some chips and cracks, so I replaced them, as well. The repops have a little wider flange where they mount in the housing, so you might have to trim a little to get everything to fit perfect. This is one mod I'd do again in a heartbeat. Thanks, Justin. __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer -- Last edited by TonyJohnson; 03-19-2008 at 07:45 PM.

03-19-2008, 10:47 PM	#28
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,144	Re: LED's by Justin (big pics) ttt __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.