brake pedal to the floor. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prerunner1982 · 03-20-2008, 01:53 AM

I got tired of looking at it and decided to limp it into town to a mechanic with the right tools. When I started it up and pulled out of the driveway the pedal felt stiffer than it had since I started dealing with this problem. Drove into town just fine, stopping as normal. I went ahead and had it bled anyway since it is my wife's vehicle and she will be driving around alot with our two daughters. The shop said there was still quite a bit of air in the system.. works fine now. I was pleasantly suprised that there was any pedal pressure today... but am glad there was.. Took some weight off my shoulders.

03-20-2008, 01:53 AM	#16
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: brake pedal to the floor. I got tired of looking at it and decided to limp it into town to a mechanic with the right tools. When I started it up and pulled out of the driveway the pedal felt stiffer than it had since I started dealing with this problem. Drove into town just fine, stopping as normal. I went ahead and had it bled anyway since it is my wife's vehicle and she will be driving around alot with our two daughters. The shop said there was still quite a bit of air in the system.. works fine now. I was pleasantly suprised that there was any pedal pressure today... but am glad there was.. Took some weight off my shoulders. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 03-20-2008 at 01:55 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.