Alternator and Factory AC With Headers

[damnyankee36]

My 66 has the driver's side alternator and passenger's side factory AC compressor set up. I would like to get headers for this motor. Are there kits that will allow the factory alternator and compressor brackets to mount properly to the exhaust manifolds?

Thanks!

Larry

[PrerunnerRob]

Originally Posted by damnyankee36

My 66 has the driver's side alternator and passenger's side factory AC compressor set up. I would like to get headers for this motor. Are there kits that will allow the factory alternator and compressor brackets to mount properly to the exhaust manifolds?

Thanks!

Larry

I assume you are talking about heads without the accessory holes?
I had a set of headers, some mr gasket brackets, and they ran an alternator fine. The AC will be another story, any chance you could post some pictures of the factory AC?

[LILRED66]

Originally Posted by PrerunnerRob

I assume you are talking about heads without the accessory holes?
I had a set of headers, some mr gasket brackets, and they ran an alternator fine. The AC will be another story, any chance you could post some pictures of the factory AC?

Here is a photo of a '65 Chevy C10 swb fleetside with a factory 327 and factory A/C, however it has factory ram horn exhaust manifolds and factory mounting brackets, so it may not help you with your question. If you have the factory mounting brackets and the headers, it is a matter of doing the fit-up accordingly.

Good luck with your project.