burban body on truck frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suicide 63 · 03-25-2008, 02:41 AM

guys will a 66 burb body go on a 63 short frame? I found a burb on craiglist and I am going to look at it today and if it is in better shape than my truck body I would like to use my truck drive train which is nearly done.I will give you some stats on my frame

crossmember swap ,drop spindles, slam bags ,c-notch, power steering conversion,new 6 lug rotors,350 maf tpi 700r ,posi rear disk caprice rear end with adapters to 6 lug,made my own trailing arms and lowering blocks ,87 blazer tank it is baffled for fuel injection, stainless steel fuel lines and more.thats all i can think of right now

greg64 · 03-25-2008, 03:43 AM

Yes, I think it probably would. The burb uses the 115" SWB. Anybody else know for sure?

Frizzle Fry · 03-25-2008, 05:11 AM

Should just require some body mounts swapped over. Let's see it!

suicide 63 · 03-25-2008, 06:06 AM

heres the pics from the ad
he wants 2000 does not run door and body damage on passenger side its fixable though minamal rust in the normal areas.What do you guys think i know they are hard to find options are p/b p/s a/c all factory and custom trim and clam shell doors

suicide 63 · 03-25-2008, 06:38 AM

heres some pics of my frame

03-25-2008, 02:41 AM	#1
suicide 63 Registered User Join Date: Nov 2007 Location: peculiar mo Posts: 219	burban body on truck frame guys will a 66 burb body go on a 63 short frame? I found a burb on craiglist and I am going to look at it today and if it is in better shape than my truck body I would like to use my truck drive train which is nearly done.I will give you some stats on my frame crossmember swap ,drop spindles, slam bags ,c-notch, power steering conversion,new 6 lug rotors,350 maf tpi 700r ,posi rear disk caprice rear end with adapters to 6 lug,made my own trailing arms and lowering blocks ,87 blazer tank it is baffled for fuel injection, stainless steel fuel lines and more.thats all i can think of right now

03-25-2008, 03:43 AM	#2
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: burban body on truck frame Yes, I think it probably would. The burb uses the 115" SWB. Anybody else know for sure? __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

03-25-2008, 05:11 AM	#3
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: burban body on truck frame Should just require some body mounts swapped over. Let's see it!

03-25-2008, 06:06 AM	#4
suicide 63 Registered User Join Date: Nov 2007 Location: peculiar mo Posts: 219	Re: burban body on truck frame heres the pics from the ad he wants 2000 does not run door and body damage on passenger side its fixable though minamal rust in the normal areas.What do you guys think i know they are hard to find options are p/b p/s a/c all factory and custom trim and clam shell doors Last edited by suicide 63; 02-27-2010 at 06:12 PM.

03-25-2008, 06:38 AM	#5
suicide 63 Registered User Join Date: Nov 2007 Location: peculiar mo Posts: 219	Re: burban body on truck frame heres some pics of my frame Last edited by suicide 63; 02-27-2010 at 06:12 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.