rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike C · 01-24-2003, 10:23 AM

I have 3.5" on my 15x10, but wish that I had gone to 4". The 3.5" on my 15x8 with 33 14.5 MT Bajas rubbed on boht Depending on the drag link and front leaf spring at lock. 35 14.5 on the 10" rim did not. I have 35 12.5 BFG now, and they rub on the lower part of the front fender on the passengers side, but that fender was damaged and incorrectly repaired. The BFG is quite a bit taller than the MT were, but both listed at 35". You might get away with 4 1/2" bs, but I would want to borrow a wheel and test it before spending my $.

01-24-2003, 10:23 AM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,790	I have 3.5" on my 15x10, but wish that I had gone to 4". The 3.5" on my 15x8 with 33 14.5 MT Bajas rubbed on boht Depending on the drag link and front leaf spring at lock. 35 14.5 on the 10" rim did not. I have 35 12.5 BFG now, and they rub on the lower part of the front fender on the passengers side, but that fender was damaged and incorrectly repaired. The BFG is quite a bit taller than the MT were, but both listed at 35". You might get away with 4 1/2" bs, but I would want to borrow a wheel and test it before spending my $. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.