Dana 60 front- differential and outer knuckles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 11-01-2007, 02:13 PM

4.56 gears, housing is in very nice shape. Includes housing, knuckles,differential, gears and cover.

No spindles, inner or outer axle shafts, hubs or rotors.

450.00 plus the ride. Good for someone going extreme or replacing a bent housing

*FormerMember* · 03-05-2008, 06:08 AM

Still got this... need to make room in my garage.

*FormerMember* · 03-14-2008, 03:41 AM

Still kicking this thing... trying to clear the axle cart.

muddyole 69 · 03-14-2008, 07:05 AM

need anything in trade I have a 14 bolt ff to match that front but I am just a bit on the po side right now

*FormerMember* · 03-14-2008, 07:07 AM

Quote:

Originally Posted by muddyole 69

need anything in trade I have a 14 bolt ff to match that front but I am just a bit on the po side right now

67-8 front sheet metal, a long bed in solid shape... I have all the axles I could ever use.

muddyole 69 · 03-14-2008, 11:35 AM

grendel I have a pretty decent longbed came up from nc last year no gate and I too am searching for 67-8 sheet metal however i have a nice hood and maybe a drivers fender was looking to complete the clip for my new project but if we can come to an agreement I am game for letting them go pm me and we can work out the details on this and thank you mike

*FormerMember* · 03-14-2008, 05:51 PM

Quote:

Originally Posted by muddyole 69

grendel I have a pretty decent longbed came up from nc last year no gate and I too am searching for 67-8 sheet metal however i have a nice hood and maybe a drivers fender was looking to complete the clip for my new project but if we can come to an agreement I am game for letting them go pm me and we can work out the details on this and thank you mike

Pics of the bed?

*FormerMember* · 03-16-2008, 06:40 AM

Quote:

Originally Posted by muddyole 69

grendel I have a pretty decent longbed came up from nc last year no gate and I too am searching for 67-8 sheet metal however i have a nice hood and maybe a drivers fender was looking to complete the clip for my new project but if we can come to an agreement I am game for letting them go pm me and we can work out the details on this and thank you mike

bueller?

muddyole 69 · 03-16-2008, 09:24 PM

pics

muddyole 69 · 03-16-2008, 09:26 PM

2 more some small rust spots pictured

*FormerMember* · 03-16-2008, 09:28 PM

Quote:

Originally Posted by muddyole 69

2 more some small rust spots pictured

Hmn, matches the color of the cab I have now.

I am interested.

muddyole 69 · 03-17-2008, 02:42 AM

let me know what we can do on a swap and maybe a meet somewhere to save both of us some coins on fuel thanks Mike

*FormerMember* · 03-17-2008, 03:30 AM

Quote:

Originally Posted by muddyole 69

let me know what we can do on a swap and maybe a meet somewhere to save both of us some coins on fuel thanks Mike

I need to figure out if it would fit the frame I have.
I have a measurement from the back of the cab to centerline of the axle of 63"

muddyole 69 · 03-18-2008, 05:26 AM

thats cool let me know when you know something and thanks Mike

*FormerMember* · 03-27-2008, 12:22 AM

Still have this. I also have sheet metal coming from CA. it's a hauling bed, as the fleetside would take too much work.

11-01-2007, 02:13 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Dana 60 front- differential and outer knuckles 4.56 gears, housing is in very nice shape. Includes housing, knuckles,differential, gears and cover. No spindles, inner or outer axle shafts, hubs or rotors. 450.00 plus the ride. Good for someone going extreme or replacing a bent housing

03-05-2008, 06:08 AM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Dana 60 front- differential and outer knuckles Still got this... need to make room in my garage.

03-14-2008, 03:41 AM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Dana 60 front- differential and outer knuckles Still kicking this thing... trying to clear the axle cart.

03-14-2008, 07:05 AM	#4
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles need anything in trade I have a 14 bolt ff to match that front but I am just a bit on the po side right now __________________ hav'n fun be'n me

03-14-2008, 11:35 AM	#6
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles grendel I have a pretty decent longbed came up from nc last year no gate and I too am searching for 67-8 sheet metal however i have a nice hood and maybe a drivers fender was looking to complete the clip for my new project but if we can come to an agreement I am game for letting them go pm me and we can work out the details on this and thank you mike __________________ hav'n fun be'n me

03-16-2008, 09:24 PM	#9
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles pics Attached Images __________________ hav'n fun be'n me

03-16-2008, 09:26 PM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles 2 more some small rust spots pictured Attached Images __________________ hav'n fun be'n me

03-17-2008, 02:42 AM	#12
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles let me know what we can do on a swap and maybe a meet somewhere to save both of us some coins on fuel thanks Mike __________________ hav'n fun be'n me

03-18-2008, 05:26 AM	#14
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Dana 60 front- differential and outer knuckles thats cool let me know when you know something and thanks Mike __________________ hav'n fun be'n me

03-27-2008, 12:22 AM	#15
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Dana 60 front- differential and outer knuckles Still have this. I also have sheet metal coming from CA. it's a hauling bed, as the fleetside would take too much work. Last edited by FormerMember; 03-27-2008 at 12:22 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.