WTB - wiper motor mounting sheet metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevLoRay · 04-06-2008, 05:31 PM

My wiper motor fell through the cab (don't use industrial silastic....thanks to the P.O.).

So, I'd like to buy a patch panel from a cab that has a good original wiper mount intact.

Any help will be greatly appreciated.

billsbowtie · 04-07-2008, 04:29 AM

i think i have what you need . i will look for a pic.

ChevLoRay · 04-07-2008, 06:04 PM

Thanks, man. I await your pic.

billsbowtie · 04-08-2008, 03:44 AM

i will try to get one monday.

billsbowtie · 04-09-2008, 06:22 AM

i think this is the part you are looking for. but i don't see any way of cutting it out. can't get a grinder or sawzaw in there .

**John Fabris** · 04-09-2008, 08:54 PM

Not to step on Bills toes, but if he does not come through for you on this, let me know, as I am cutting up a 67 cab for a project that I am working on and I do not need the cowl section, so I can cut as much or little as you need. Cab is rusted out along floor and above windshield.

billsbowtie · 04-10-2008, 04:15 AM

john if you can help him go ahead. sounds like you can get in there to the piece he needs alot easier than i can right now. bill

04-06-2008, 05:31 PM	#1
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	WTB - wiper motor mounting sheet metal My wiper motor fell through the cab (don't use industrial silastic....thanks to the P.O.). So, I'd like to buy a patch panel from a cab that has a good original wiper mount intact. Any help will be greatly appreciated. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

04-07-2008, 04:29 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i think i have what you need . i will look for a pic. __________________ i have 67/72 chevy truck parts f/s.

04-07-2008, 06:04 PM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: WTB - wiper motor mounting sheet metal Thanks, man. I await your pic. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

04-08-2008, 03:44 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i will try to get one monday. __________________ i have 67/72 chevy truck parts f/s.

04-09-2008, 06:22 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i think this is the part you are looking for. but i don't see any way of cutting it out. can't get a grinder or sawzaw in there . __________________ i have 67/72 chevy truck parts f/s.

04-09-2008, 08:54 PM	#6
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: WTB - wiper motor mounting sheet metal Not to step on Bills toes, but if he does not come through for you on this, let me know, as I am cutting up a 67 cab for a project that I am working on and I do not need the cowl section, so I can cut as much or little as you need. Cab is rusted out along floor and above windshield. __________________ John Fabris 67 C10 SWB

04-10-2008, 04:15 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal john if you can help him go ahead. sounds like you can get in there to the piece he needs alot easier than i can right now. bill __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.