Bench seat cover reupholstery - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mt Man Chad · 04-12-2008, 07:26 PM

I just recived a new black houndstooth bench seat cover for my 71.

I've been searching here with no luck for a forum on - "How To rebuild/reupholster a stock bench seat"? Who here has done it. And what tricks to help in the process.

The foam in my bench is still firm and in great shape. other than hog ring plyer's and 150 hog rings what's needed to do a great job?

chevy72blu · 04-12-2008, 07:36 PM

I just bought a "fix up" kit or what ever its called from LMC with new upper foam, and built up the lower piece using tape/foam from micheals. As far as re-upholstery, I found a custom shop in Vegas that did a pretty good job on it for about $150 bucks using all new vynil/fabric.

Sorry I couldnt be more help. Upholstery is one of the few things that I still leave up to someone else.

jayharrell · 04-12-2008, 07:41 PM

Use spray glue. Turn your new cover inside out. that helps alot too. Some good 3m spray glue. Start at the top and slowly work your way to the bottom. Or front to back. Its not hard, just takes a while to get a nice look with no waves or folds.

cdowns · 04-12-2008, 07:45 PM

a hair dryer comes in handy to help strech and fit the covers in the corners and sides

72BlckButy · 04-12-2008, 09:36 PM

Check with Classic Parts of America, they offer the cover and I think all the rest of the supplies.

I think would be a great candidate for a new FAQ... especially since I'm picking up my original '71 bench this weekend.

Mt Man Chad · 04-15-2008, 06:45 PM

ttt - Anybody?

cstanley · 04-15-2008, 09:05 PM

spray glue really isn't necessary. i've now done a few of these repop covers with great results. set it in the sun and look out for sharp edges on your frame. sometimes good to slip some chipboard on the sharp edge.

I also think Brothers has a tech write-up on their website. try here: http://www.brotherstrucks.com/techar...20INSTALLATION

Mt Man Chad · 04-15-2008, 09:45 PM

THANKS, That's is exactly the type of directions I was looking for!

**leddzepp** · 04-15-2008, 09:52 PM

Let the cover sit in the sun for a while and that helps smooth out the creases before you install it.

72armyswbtruck · 04-16-2008, 03:21 AM

Hey,
You know that were gonna want to see pics of the process when your done with yours. Keep that digital camera close

Botietruck · 04-16-2008, 03:54 AM

leddzepp is right, if you let the cover sit in the hot sun for a while it will certainly go on a lot easier.
Chad, Take good notes on this, I'll be doing my seat in a couple weeks!

Mt Man Chad · 04-16-2008, 08:33 PM

I'll take lots of pictures and take notes as i go!

Then do a write up from what I learned for frequently asked questions!

BobbyK · 04-16-2008, 08:40 PM

On the Blazer forum.

http://67-72chevytrucks.com/vboard/s...d.php?t=287185

And here for ALL the pic's.
http://public.fotki.com/blazbk/blaze...g_my_2_buck-1/

04-12-2008, 07:26 PM	#1
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Bench seat cover reupholstery I just recived a new black houndstooth bench seat cover for my 71. I've been searching here with no luck for a forum on - "How To rebuild/reupholster a stock bench seat"? Who here has done it. And what tricks to help in the process. The foam in my bench is still firm and in great shape. other than hog ring plyer's and 150 hog rings what's needed to do a great job? __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-12-2008, 07:36 PM	#2
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: Bench seat cover reupholstery I just bought a "fix up" kit or what ever its called from LMC with new upper foam, and built up the lower piece using tape/foam from micheals. As far as re-upholstery, I found a custom shop in Vegas that did a pretty good job on it for about $150 bucks using all new vynil/fabric. Sorry I couldnt be more help. Upholstery is one of the few things that I still leave up to someone else. __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

04-12-2008, 07:41 PM	#3
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Bench seat cover reupholstery Use spray glue. Turn your new cover inside out. that helps alot too. Some good 3m spray glue. Start at the top and slowly work your way to the bottom. Or front to back. Its not hard, just takes a while to get a nice look with no waves or folds.

04-12-2008, 07:45 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Bench seat cover reupholstery a hair dryer comes in handy to help strech and fit the covers in the corners and sides __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-12-2008, 09:36 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Bench seat cover reupholstery Check with Classic Parts of America, they offer the cover and I think all the rest of the supplies. I think would be a great candidate for a new FAQ... especially since I'm picking up my original '71 bench this weekend. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-15-2008, 06:45 PM	#6
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: Bench seat cover reupholstery ttt - Anybody? __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-15-2008, 09:05 PM	#7
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Bench seat cover reupholstery spray glue really isn't necessary. i've now done a few of these repop covers with great results. set it in the sun and look out for sharp edges on your frame. sometimes good to slip some chipboard on the sharp edge. I also think Brothers has a tech write-up on their website. try here: http://www.brotherstrucks.com/techar...20INSTALLATION __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 04-15-2008 at 09:07 PM.

04-15-2008, 09:45 PM	#8
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: Bench seat cover reupholstery THANKS, That's is exactly the type of directions I was looking for! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-15-2008, 09:52 PM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Bench seat cover reupholstery Let the cover sit in the sun for a while and that helps smooth out the creases before you install it.

04-16-2008, 03:21 AM	#10
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Bench seat cover reupholstery Hey, You know that were gonna want to see pics of the process when your done with yours. Keep that digital camera close __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-16-2008, 03:54 AM	#11
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: Bench seat cover reupholstery leddzepp is right, if you let the cover sit in the hot sun for a while it will certainly go on a lot easier. Chad, Take good notes on this, I'll be doing my seat in a couple weeks! __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

04-16-2008, 08:33 PM	#12
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: Bench seat cover reupholstery I'll take lots of pictures and take notes as i go! Then do a write up from what I learned for frequently asked questions! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-16-2008, 08:40 PM	#13
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	Re: Bench seat cover reupholstery On the Blazer forum. http://67-72chevytrucks.com/vboard/s...d.php?t=287185 And here for ALL the pic's. http://public.fotki.com/blazbk/blaze...g_my_2_buck-1/ __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 04-16-2008 at 08:43 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.