jefferson WI swapmeet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wibilly · 04-14-2008, 04:48 AM

any board venders or members going this month? looking for lots of stuff for a few trucks.

john@thepier · 04-14-2008, 04:52 AM

Thats close to me, but I never go anymore, I use to sell there but I'm tired of being offered $40.00 for a $200 dollar part I have forsale for $100 get my drift. What you looking for anyway, never know what I can find laying around in the shed. JOHN

wibilly · 04-14-2008, 05:56 AM

i'm always looking for rust free sheet metal, not that i need any right now. needing some drop spindels for1of my 67s,windshield and rear window seal, for my 69 probably get a complete cab set.gutters need resealed so i'm gonna paint at least the roof. i'm gonna peal of the rockers before i go in case i need lower a pillers. a set of sport mirrors and an antenna for my 71. i could use a 71-72 grill and bumpers. front drive shaft for a th350 i basicly buy anything realated to our trucks reasonably priced i have 8 all needing at least a little somthing.it's also time to start gathering parts for my 68 chevelle ss convertable. always looking for munci and t-10s. my buddy collects cast iron- mostly bbc parts and camel hump heads

72gord · 04-14-2008, 03:01 PM

Not sure, but hoping to go Saturday...about a 2 1/2 hour drive from me, how far for you wibilly?

john@thepier · 04-14-2008, 03:37 PM

I'll take a look and see whats laying around and get back to you. JOHN

1971ChevyTruck · 04-14-2008, 03:41 PM

I go every year...That place has grown so much in the 15 years I have been going...I know it sucks to sell there but I always get good deals. We tried to sell a 1972 Nova SS--no motor but had trans--body was about a 7 or 8 on a scale to 10 and all I was asking was $1500 and I actually had a guy offer me $300 for it.

john@thepier · 04-15-2008, 12:39 AM

Talked with one of my buddys today and he has two spaces for the Jefferson meet available. I think I'll take them. So I'm going to get some stuff together and go up there. I'll let you guys know the # of the site so you can come (buy) by. WiBilly I think my buddy may have some chevelle stuff I'll talk to him and let you know that also. JOHN

ed2552 · 04-15-2008, 12:45 AM

Where is Jefferson? What part of the state?

john@thepier · 04-15-2008, 12:53 AM

Between Madison and Milwaukee in the SE portion of the state.

ed2552 · 04-15-2008, 01:00 AM

oic, that is too far for me to go then

wibilly · 04-15-2008, 01:25 AM

it seems like forever away. somwhere between 4 and 6 hours, i think this will be my fourth trip there. i always seem to find somthing to bring home, need it or not.

02_GMC_97_FIII · 04-15-2008, 03:00 AM

I'll be there, go every year. Now am up to two trucks I can buy parts for.

wibilly · 04-15-2008, 03:35 AM

where is campbellsport?

02_GMC_97_FIII · 04-15-2008, 04:07 AM

40 miles north of Milwaukee.... or 15 miles south of Fond du lac....

ed2552 · 04-15-2008, 04:27 AM

That is like an 8 hour drive for me, at least

wibilly · 04-20-2008, 03:37 AM

any word on your space numbers and chevelle parts yet john?

john@thepier · 04-20-2008, 04:11 AM

I'll be talking to him tomarrow about the space #, no Chevelle parts I asked him that last week. Got my truetrac, gears, install kit,1350 yoke, and rear ta cover today $900 bucks out or should I say into the rear-end for my 70 today so I know I better get up to the swapmeet and get some stuff sold.

04-14-2008, 04:48 AM	#1
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	jefferson WI swapmeet any board venders or members going this month? looking for lots of stuff for a few trucks. __________________ common sense isn't so common anymore

04-14-2008, 04:52 AM	#2
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: jefferson WI swapmeet Thats close to me, but I never go anymore, I use to sell there but I'm tired of being offered $40.00 for a $200 dollar part I have forsale for $100 get my drift. What you looking for anyway, never know what I can find laying around in the shed. JOHN

04-14-2008, 05:56 AM	#3
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: jefferson WI swapmeet i'm always looking for rust free sheet metal, not that i need any right now. needing some drop spindels for1of my 67s,windshield and rear window seal, for my 69 probably get a complete cab set.gutters need resealed so i'm gonna paint at least the roof. i'm gonna peal of the rockers before i go in case i need lower a pillers. a set of sport mirrors and an antenna for my 71. i could use a 71-72 grill and bumpers. front drive shaft for a th350 i basicly buy anything realated to our trucks reasonably priced i have 8 all needing at least a little somthing.it's also time to start gathering parts for my 68 chevelle ss convertable. always looking for munci and t-10s. my buddy collects cast iron- mostly bbc parts and camel hump heads __________________ common sense isn't so common anymore

04-14-2008, 03:01 PM	#4
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Re: jefferson WI swapmeet Not sure, but hoping to go Saturday...about a 2 1/2 hour drive from me, how far for you wibilly?

04-14-2008, 03:37 PM	#5
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: jefferson WI swapmeet I'll take a look and see whats laying around and get back to you. JOHN

04-14-2008, 03:41 PM	#6
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: jefferson WI swapmeet I go every year...That place has grown so much in the 15 years I have been going...I know it sucks to sell there but I always get good deals. We tried to sell a 1972 Nova SS--no motor but had trans--body was about a 7 or 8 on a scale to 10 and all I was asking was $1500 and I actually had a guy offer me $300 for it.

04-15-2008, 12:39 AM	#7
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: jefferson WI swapmeet Talked with one of my buddys today and he has two spaces for the Jefferson meet available. I think I'll take them. So I'm going to get some stuff together and go up there. I'll let you guys know the # of the site so you can come (buy) by. WiBilly I think my buddy may have some chevelle stuff I'll talk to him and let you know that also. JOHN

04-15-2008, 12:45 AM	#8
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: jefferson WI swapmeet Where is Jefferson? What part of the state? __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

04-15-2008, 12:53 AM	#9
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: jefferson WI swapmeet Between Madison and Milwaukee in the SE portion of the state.

04-15-2008, 01:00 AM	#10
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: jefferson WI swapmeet oic, that is too far for me to go then __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

04-15-2008, 01:25 AM	#11
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: jefferson WI swapmeet it seems like forever away. somwhere between 4 and 6 hours, i think this will be my fourth trip there. i always seem to find somthing to bring home, need it or not. __________________ common sense isn't so common anymore

04-15-2008, 03:00 AM	#12
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: jefferson WI swapmeet I'll be there, go every year. Now am up to two trucks I can buy parts for. __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP

04-15-2008, 03:35 AM	#13
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: jefferson WI swapmeet where is campbellsport? __________________ common sense isn't so common anymore

04-15-2008, 04:07 AM	#14
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: jefferson WI swapmeet 40 miles north of Milwaukee.... or 15 miles south of Fond du lac.... __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP

04-15-2008, 04:27 AM	#15
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: jefferson WI swapmeet That is like an 8 hour drive for me, at least __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A



Register or Log In To remove these advertisements.

04-20-2008, 03:37 AM	#16
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: jefferson WI swapmeet any word on your space numbers and chevelle parts yet john? __________________ common sense isn't so common anymore

04-20-2008, 04:11 AM	#17
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: jefferson WI swapmeet I'll be talking to him tomarrow about the space #, no Chevelle parts I asked him that last week. Got my truetrac, gears, install kit,1350 yoke, and rear ta cover today $900 bucks out or should I say into the rear-end for my 70 today so I know I better get up to the swapmeet and get some stuff sold.

Register or Log In To remove these advertisements.