getting ready to put the motor and trans back

[creeldaddy]

i have a sm465 and just want to make shure i didnt miss anything

here is my frame the 1st crossmember is motor and suspention, the second is where the bellhousing mounts, but isnt there supose to be a third for this mount on the back, if so anyone know where i can get one

[Wrenchbender Ret]

You don't need one. 72 on back used the mounts on the bell houseing. That is a 73 up trans. but will work fine. You had to use bolts & nuts on the lower trans. mount bolts.