New member w/ 72 GMC into 69 Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southern C10 · 04-22-2008, 09:05 PM

Hey guys,

I just joined up and wanted to post some pics of my project.

Before heading back over to Iraq for my fourth trip I bought a 72 GMC SWB with a 350 three on the tree. It had already been someones project so all the rust was cut out and patched and the truck had been painted back to the original Okra.

As a kid we had a 69 chevy (Blue one in pics) on the farm that I learned to drive with. It was going to be a future project for me and my grandad but about 10 years ago grandma rolled it over in a storm. I found the 72 two weeks before we deployed over here. Ill be back at the end of May and will spend my three weeks of leave rebuilding it with grandpa and my brother. The plan is to make the 72 GMC into the 69 Chevy.

Any body got any tips or problems I may run into doing this project? This is my first restore. Thanks, Brian.

72BlckButy · 04-22-2008, 09:13 PM

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.

Just to wanted to bring this to your attention....

2008 Board Meet in Big Sandy, TN

19stepSide72 · 04-22-2008, 09:46 PM

welcome to the board and thank you for your service. Been there and done that. Glad to be home. wish you the best over there. Restoring a truck with your grandpa has to be the greatest thing a person could do. I think. My gramps died before I was born....jealous.....yes I am!!!

**WorkinLonghorn** · 04-22-2008, 10:22 PM

Hey there,welcome from California,the land of fruits,nuts and flakes.
That '72 looks pretty nice as it sits. Why would you need to get the '69 involved? What engine does the '72 have?-Brian

Southern C10 · 04-22-2008, 10:41 PM

Right now its got a 350 with a three on the tree tranny. Im gonna leave the engine and replace the trans with a 350 auto. The body is about %85 done and the paint is pretty well done but im just not a fan of the okra or the GMC front end. Thanks for the welcome.

chevy72blu · 04-22-2008, 10:48 PM

Thats a fine looking 72 you have to start with. Any rust areas you plan on tackling?

As for the 69... It may be over your head, but I cant imagine anything with more sentimental value than the vehicle you learned to drive in. Tear into you 72, and get it the way you want it. You'll learn a lot. On down the road, when your automotive/metal working skills are much better, I would break that thing down and make it look just like you did when you were a kid. It looks saveable - was the frame damaged? I imagine theres quite a bit of cancer having set out that long, but there is hardly a panel that isnt reproduced.

Let us know where you go with it, and thank you for serving your Country!

lowriden58 · 04-22-2008, 11:08 PM

guys i think he wants to put a 69 chevy front on the 72 GMC

swap should be pretty simple

Shyguy · 04-22-2008, 11:21 PM

Changing to a '69 Chevy from a '72 GMC is pretty straight forward.

A few things you will need are a Chevy radiator support and grill.

You will need to cover the GMC on the tailgate and remove the GMC from the hood.

Good luck with your new project.

Take care and be safe.

Danny

Southern C10 · 04-22-2008, 11:31 PM

Hey guys,

Yes lowriden58, I want to put a 69 front end on the 72 GMC. The real 69 (blue) in the pic actually belongs to my uncle now. He wouldnt sell it to me to fix up but its for the best. I dont think I could tackle that big of a project as a newbie. The GMC has one small rust spot (in the pic) at the drivers left foot that should be fairly simple to repair. Im thinking about a OEM factory orange with a white cab. Thanks for all the welcomes.

HoupPhotography · 04-22-2008, 11:59 PM

Welcome to the board from HOT az PHOENIX, (it's not to hot yet).....

Thank You for your service to our country, If you are ever in Phoenix, look me up, the least I can do is buy you a cold one and talk trucks!!

Southern C10 · 04-23-2008, 12:07 AM

HoupPhotography ,

I might just take you up on that. I should be in Tempe to see a friend in June. Im a coors light man. Seconds are on me.

Longhorn Man · 04-23-2008, 12:26 AM

add to that parts list, a set of chevy fenders.
your best bet would be to locate an entire front clip, fenders, hood, grill, core support, and buy the whole thing.

From one vet to another, thank you for your (repeated) service, keep your head down, and come home safe.

Southern C10 · 04-23-2008, 12:32 AM

Thanks Longhorn Man,

Are the fenders and hood off the 72 GMC not the same as the Chevy? I thought pretty much all parts from 69-72s were interchangeable between chevy and GMC?

Thanks, Brian.

**El Jay** · 04-23-2008, 12:55 AM

Thank you for your service and welcome to the board.

You'll find that the knowledge is encyclopedia and the service helpful and friendly.

I thought I knew about old Chevys, but these guys teach me something new everyday.

Longhorn Man · 04-23-2008, 01:00 AM

fenders are not the same.
The hood is the same stamping, but there are 6 holes for the lettering, verses two holes on a chevy badge.

powell72 · 04-23-2008, 01:02 AM

Quote:

Originally Posted by B.K.S.

Are the fenders and hood off the 72 GMC not the same as the Chevy? I thought pretty much all parts from 69-72s were interchangeable between chevy and GMC?

The hood is the same but the fenders are different. You need to find some 69-72 Chevy fenders.

Welcome and thanks for all you do.

powell72 · 04-23-2008, 01:12 AM

Andy, you got me, my computer is slow today.

msgross · 04-23-2008, 01:19 AM

GMC fenders fit 68 chevy (with the side marker) and 67 chevy (if you fill in the side marker). Thanks for your service, I assume that your with the 101st?

You could pay $25 to become a member and put your clip up for sale and or trade for a good 69/70 clip. Or put an ad on craigslist.... Good luck over there and make it back safely...

bw4sale · 04-23-2008, 03:26 AM

Welcome from Hendersonville and thanks for you service.

1tigers · 04-23-2008, 07:47 AM

You can ship me that old junkie front clip and grill. i might even give you a little money for it

Southern C10 · 04-23-2008, 10:53 AM

Thanks guys,

Longhorn Man/msgross/powell72, Thanks, what are the differences between the GMC and Chevy fenders and where would be a good place to look for replacements?

msgross, I was with the 101st for 4.5 years now im with another unit on post. Think John Waynes 1968 hit movie.......

1tigers, The truck is ontop of Lookout Mtn in Gadsden AL. Ill be their mid June to 5 Jul. If your serious we could meet up and work out a deal, if your willing to travel into ROLL TIDE country!!

1tigers · 04-23-2008, 04:25 PM

Let me know when you get back. I love road trips.

04-22-2008, 09:05 PM	#1
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	New member w/ 72 GMC into 69 Chevy Hey guys, I just joined up and wanted to post some pics of my project. Before heading back over to Iraq for my fourth trip I bought a 72 GMC SWB with a 350 three on the tree. It had already been someones project so all the rust was cut out and patched and the truck had been painted back to the original Okra. As a kid we had a 69 chevy (Blue one in pics) on the farm that I learned to drive with. It was going to be a future project for me and my grandad but about 10 years ago grandma rolled it over in a storm. I found the 72 two weeks before we deployed over here. Ill be back at the end of May and will spend my three weeks of leave rebuilding it with grandpa and my brother. The plan is to make the 72 GMC into the 69 Chevy. Any body got any tips or problems I may run into doing this project? This is my first restore. Thanks, Brian. Attached Images

04-22-2008, 09:13 PM	#2
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New member w/ 72 GMC into 69 Chevy to the board from Mid-MO!!! You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. Just to wanted to bring this to your attention.... 2008 Board Meet in Big Sandy, TN __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-22-2008 at 09:14 PM.

04-22-2008, 09:46 PM	#3
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: New member w/ 72 GMC into 69 Chevy welcome to the board and thank you for your service. Been there and done that. Glad to be home. wish you the best over there. Restoring a truck with your grandpa has to be the greatest thing a person could do. I think. My gramps died before I was born....jealous.....yes I am!!!

04-22-2008, 10:22 PM	#4
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: New member w/ 72 GMC into 69 Chevy Hey there,welcome from California,the land of fruits,nuts and flakes. That '72 looks pretty nice as it sits. Why would you need to get the '69 involved? What engine does the '72 have?-Brian __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

04-22-2008, 10:41 PM	#5
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: New member w/ 72 GMC into 69 Chevy Right now its got a 350 with a three on the tree tranny. Im gonna leave the engine and replace the trans with a 350 auto. The body is about %85 done and the paint is pretty well done but im just not a fan of the okra or the GMC front end. Thanks for the welcome.

04-22-2008, 10:48 PM	#6
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: New member w/ 72 GMC into 69 Chevy Thats a fine looking 72 you have to start with. Any rust areas you plan on tackling? As for the 69... It may be over your head, but I cant imagine anything with more sentimental value than the vehicle you learned to drive in. Tear into you 72, and get it the way you want it. You'll learn a lot. On down the road, when your automotive/metal working skills are much better, I would break that thing down and make it look just like you did when you were a kid. It looks saveable - was the frame damaged? I imagine theres quite a bit of cancer having set out that long, but there is hardly a panel that isnt reproduced. Let us know where you go with it, and thank you for serving your Country! __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

04-22-2008, 11:08 PM	#7
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: New member w/ 72 GMC into 69 Chevy guys i think he wants to put a 69 chevy front on the 72 GMC swap should be pretty simple __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

04-22-2008, 11:21 PM	#8
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: New member w/ 72 GMC into 69 Chevy Changing to a '69 Chevy from a '72 GMC is pretty straight forward. A few things you will need are a Chevy radiator support and grill. You will need to cover the GMC on the tailgate and remove the GMC from the hood. Good luck with your new project. Take care and be safe. Danny

04-22-2008, 11:31 PM	#9
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: New member w/ 72 GMC into 69 Chevy Hey guys, Yes lowriden58, I want to put a 69 front end on the 72 GMC. The real 69 (blue) in the pic actually belongs to my uncle now. He wouldnt sell it to me to fix up but its for the best. I dont think I could tackle that big of a project as a newbie. The GMC has one small rust spot (in the pic) at the drivers left foot that should be fairly simple to repair. Im thinking about a OEM factory orange with a white cab. Thanks for all the welcomes. Attached Images

04-22-2008, 11:59 PM	#10
HoupPhotography Registered User Join Date: Feb 2008 Location: Phoenix, Az Posts: 1,204	Re: New member w/ 72 GMC into 69 Chevy Welcome to the board from HOT az PHOENIX, (it's not to hot yet)..... Thank You for your service to our country, If you are ever in Phoenix, look me up, the least I can do is buy you a cold one and talk trucks!! __________________ R.I.P. Scott Kalitta

04-23-2008, 12:07 AM	#11
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: New member w/ 72 GMC into 69 Chevy HoupPhotography , I might just take you up on that. I should be in Tempe to see a friend in June. Im a coors light man. Seconds are on me.

04-23-2008, 12:26 AM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: New member w/ 72 GMC into 69 Chevy add to that parts list, a set of chevy fenders. your best bet would be to locate an entire front clip, fenders, hood, grill, core support, and buy the whole thing. From one vet to another, thank you for your (repeated) service, keep your head down, and come home safe.

04-23-2008, 12:32 AM	#13
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: New member w/ 72 GMC into 69 Chevy Thanks Longhorn Man, Are the fenders and hood off the 72 GMC not the same as the Chevy? I thought pretty much all parts from 69-72s were interchangeable between chevy and GMC? Thanks, Brian.

04-23-2008, 12:55 AM	#14
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: New member w/ 72 GMC into 69 Chevy Thank you for your service and welcome to the board. You'll find that the knowledge is encyclopedia and the service helpful and friendly. I thought I knew about old Chevys, but these guys teach me something new everyday. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

04-23-2008, 01:00 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: New member w/ 72 GMC into 69 Chevy fenders are not the same. The hood is the same stamping, but there are 6 holes for the lettering, verses two holes on a chevy badge.



Register or Log In To remove these advertisements.

04-23-2008, 01:12 AM	#17
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: New member w/ 72 GMC into 69 Chevy Andy, you got me, my computer is slow today. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

04-23-2008, 01:19 AM	#18
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: New member w/ 72 GMC into 69 Chevy GMC fenders fit 68 chevy (with the side marker) and 67 chevy (if you fill in the side marker). Thanks for your service, I assume that your with the 101st? You could pay $25 to become a member and put your clip up for sale and or trade for a good 69/70 clip. Or put an ad on craigslist.... Good luck over there and make it back safely... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-23-2008, 03:26 AM	#19
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: New member w/ 72 GMC into 69 Chevy Welcome from Hendersonville and thanks for you service. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

04-23-2008, 07:47 AM	#20
1tigers Registered User Join Date: Apr 2008 Location: auburn,al. Posts: 32	Re: New member w/ 72 GMC into 69 Chevy You can ship me that old junkie front clip and grill. i might even give you a little money for it

04-23-2008, 10:53 AM	#21
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: New member w/ 72 GMC into 69 Chevy Thanks guys, Longhorn Man/msgross/powell72, Thanks, what are the differences between the GMC and Chevy fenders and where would be a good place to look for replacements? msgross, I was with the 101st for 4.5 years now im with another unit on post. Think John Waynes 1968 hit movie....... 1tigers, The truck is ontop of Lookout Mtn in Gadsden AL. Ill be their mid June to 5 Jul. If your serious we could meet up and work out a deal, if your willing to travel into ROLL TIDE country!! __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

04-23-2008, 04:25 PM	#22
1tigers Registered User Join Date: Apr 2008 Location: auburn,al. Posts: 32	Re: New member w/ 72 GMC into 69 Chevy Let me know when you get back. I love road trips.

Register or Log In To remove these advertisements.