bagged trucks on rally

[laidoutc-10]

let see all the c10 bagged on rally with tire size and offset

[texastrendz]

man i really wanna see these trucks also. i tried posting earlier in the week about 17" rallyes with limited response. 1. hope some people will chime in.

[Shane]

is a great way to find most anything you're looking for.

[hotrodhomi]

here is a crappy camera phone pic of my blazer.

[crzngmychvy]

Here is an old pic of my blazer on 15x8 rallies. Don't remember tire size off hand, but can check later if you need it:

[franky69c10]

Originally Posted by crzngmychvy

Here is an old pic of my blazer on 15x8 rallies. Don't remember tire size off hand, but can check later if you need it:

what size of tire's do u have

[franky69c10]

any more

[powell72]

Here's my previous project, this is the only pic I have of it aired out on rally's.
245/60/15's.

[LUV2XCLR8]

Wheel Vintiques Vette Rally's

17" x 8" w/ 4.5" Backspacing

225/45/17 Sumitomo HTRZ II's

Stainless Steel Caps & Rings

[LOW DOUGH]

Those 17" are neat

[LUV2XCLR8]

TY, Wish I had bought a wider rear tire, but at $40 a tire used
w/ 90% of the thread left I couldn't be real choosy at the time.

[wdrthird]

Are you guys running drop spindles up front? I'd like to put a set of steelies on my truck but I've been told that 15" wheels wont work with the 2.5 drop spindles I have because the rim will rub the lower control arm.

[LOW DOUGH]

Originally Posted by wdrthird

Are you guys running drop spindles up front? I'd like to put a set of steelies on my truck but I've been told that 15" wheels wont work with the 2.5 drop spindles I have because the rim will rub the lower control arm.

I've seen that. We had a customer in a 97 or so chevy. He bought some 15's. After that he put drop spindles on and came back complaining about the wheel rubbing. So, he was a little upset but there was nothing we could do about it. Not like we knew he was going to do that. Well, He bought 17's right then and there. He was cool about the hole thing. The neat thing about it was this was an old man in his dropped Chevy talking to me about old cars and stuff.

[jorgensensc]

Yes the lower control arms rubbed a little when i used dropped spindles with my 15" ralleys. It took all of 5 minutes and I really didn't need to grind much off at all. Maybe 1/8" on the very tip of the LCA. I like them.
shawn