Cab swap anyone???

[Putter]

Short version...
I got grandpa's '69 chevy back in 1990 or so. Decided to do something with it in 2004. Found that the cab had it's share of rust due to 30 yrs of gravel-road living, cab-lights, etc....so rather than replace almost every panel in the original cab, I sought out a local cab. All I could find was a '67 small window.
Got it stripped, found a 3" spot of rust in the kick-panel (cut out and replaced), primed, sealed, and mounted that thing on the truck. Now I HATE it. I can not get used to having a small back window. And I get questions about it from those who actually KNOW what it goes on.
So, I am seeking a BIG window cab in descent shape for trade.
Here are some specs on my '67 cab.
-Floor and firewall covered in Dynamat Extreme (thanks Subtle71)
-Non-A/C dash removed and replaced with A/C dash (cut under dash pad)
-Gas tank removed and patch welded into the hole
-to my knowledge, there is ZERO rust
-only needs a small amount of body work on the back wall to repair a couple of dents (I will get pics of that)
-radio opening is NOT hacked up
-set up to accept rod or cable style accelerator (currently cable in use)

Anyone have a descent BIG back window cab they wanna trade for it?
Below are some pics I have of it. It is mounted on my daily driver, so if we make a deal, I will have to pull the interior first. **DOORS NOT INCLUDED**(sorry, they are original to grandpa's truck)

I offered this to a local (Mississippi Gulf Coast) board member, but have not heard back from him about it, so I am now posting it up on the board. Summer is coming and I am itching to start switchin'.

1st pic - That white stripe is seam sealer
5th pic - Before carpet, but with dash, gauges, etc... installed

If you are interested in this, please send me a PM, or an e-mail
putterscustomconcepts@yahoo.com

[wnc mountain]

I've got a couple to choose from. One A/C, one not. Both need some rust repair. Corners, Rockers. I'll look closer at them. If interested, I know I'm not the closest, I'll snap some photos.

[Putter]

Thanks.

[Hart_Rod]

I'll keep an eye out here. How much rust is too much?

R/

[bw4sale]

Ooo Putter. You've got me considering this. I just don't know, though.

I've got a '71 cab in primer that is in great condition. I was going to put it on my '68. The gas hole has been made into a frenched antannae thing. I was going to shave it completely. I originally wanted a 67 with the small window. I'm going to shave markers anyway, so...I just don't know.

Also, I'm a little fuzzy on what is remaining with the cab.

[bigsnookmaster]

Hey Putter, I got a real nice rust free big window cab in St.Pete ,Fl. It's got some dents,and should have rockers replaced,but no roof,firewall,cab corners,or floor rot.It,s non a/c but I also have a replacement dash or can cut the holes for you.I've done this several times with templates.Radio hole is perfect.It's one of the nicest I've seen.I'll take some pictures if you are interested.Let me know.

[Putter]

Replies sent to all. Maybe I can get back to the original look soon.....

[tommypic]

Putter I got one thats just got surface rust , cab is tight . I will get some pics today

[Putter]

Still waiting to get pics from those who offered them.

[tommypic]

Oh well it leaves me out I thought the GMC was a Big Window . it wasn't . Got 3 trucks an all are small , well 1 is big but its a rust bucket

I am going to get a big window Monday , let me know if you found one . I know I'm not close but would drive just to see the scenery
Thanks
Tommy