Radiator Suppor AC lines....Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 04-27-2008, 02:40 AM

Can someone please measure the position of the hole in the radiator support. My support doesn't have the hole so I need to make one.

Sorry the picture is so small. I could not attach a larger one. See pic below. Thanks

**john** · 04-27-2008, 02:58 AM

If you look closely , there is a dimple in the support where the hole is to be drilled. There are also dimples where the dryer clamp screws go.

jugernot · 04-27-2008, 04:15 AM

Quote:

Originally Posted by john

If you look closely , there is a dimple in the support where the hole is to be drilled. There are also dimples where the dryer clamp screws go.

I think I have found which one your talking about and marked it in this picture. Is this the right hole? Any Idea what size the hole is?

BobbyK · 04-27-2008, 05:11 AM

The hole you pointed out is for the front maker lights wire to pass through

Here is the right hole.
It's about a 1-1.5" hole.

jugernot · 04-27-2008, 06:01 AM

Quote:

Originally Posted by BobbyK

The hole you pointed out is for the front maker lights wire to pass through

Here is the right hole.
It's about a 1-1.5" hole.

Perfect. I guess I will have to remove the grill so I can drill a hole.

04-27-2008, 02:40 AM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Radiator Suppor AC lines....Question Can someone please measure the position of the hole in the radiator support. My support doesn't have the hole so I need to make one. Sorry the picture is so small. I could not attach a larger one. See pic below. Thanks Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

04-27-2008, 02:58 AM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Radiator Suppor AC lines....Question If you look closely , there is a dimple in the support where the hole is to be drilled. There are also dimples where the dryer clamp screws go. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 04-27-2008 at 03:14 AM.

04-27-2008, 05:11 AM	#4
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	Re: Radiator Suppor AC lines....Question The hole you pointed out is for the front maker lights wire to pass through Here is the right hole. It's about a 1-1.5" hole. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 04-27-2008 at 05:12 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.