i have a bit of a problem after my c notch instal

[pissonNOS]

before i installed these my front tires were rubing bad on the inner wheel well, now after i installed them im an inch higher in the front than the back and i have no more rubbing, would c notches change the geometry that much? also what are you guys doing about panhard bars and the c notch, im glad mine was only in like 2 threads because it hit the notch and pulled right out. some one have some answers or solutions for me?

[bedsled71]

was that before the c notch or becuase you lowered the rear of the truck

[larry may]

Not sure what this critter is but sure is a neat clean looking job.

[pissonNOS]

Originally Posted by bedsled71

was that before the c notch or becuase you lowered the rear of the truck

before i notched it my truck rubbed. but after i looked at it this morning i noticed my cups had come loose some how and got all cockeyed in the pocket which was preventing me from going all the way down i kinda feel stupid now

[XXL]

Originally Posted by pissonNOS

before i installed these my front tires were rubing bad on the inner wheel well, now after i installed them im an inch higher in the front than the back and i have no more rubbing, would c notches change the geometry that much? also what are you guys doing about panhard bars and the c notch, im glad mine was only in like 2 threads because it hit the notch and pulled right out. some one have some answers or solutions for me?

C-notches won't change the geometry at all unless you were already sitting the frame on the axle, in which case, you freed up the rearend to move upward a little.

As for the Panhard bar, for the long "track bar" type from ECE, it will hit the C-notch bracket. When I still have a stock frame back half with C-notch, I made the passenger notch longer to allow the Panhard bar to slip up into the notch. Search this forum for a variety of solutions to this problem.

[pissonNOS]

ok thanks