New jimmy owner! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnout · 04-30-2008, 03:47 AM

Evening boys,
I've been on the site a while back when I was looking for a jimmy. Finally found one that I liked. Specs: '85 gmc jimmy 5.0 auto with 8'' of lift and 35's. It's been modified into a truck. Pretty sweet. I have a few questions tho. The driveshaft is leaking where it goes in the transfercase. Any reason? I'm thinking it's because the driving shaft is to short. Also I was thinking of switching out the auto for a stick. Anyone done this before? And last but not least, anyone know good performance mods for a 5.0? I like the 5.0. Nice power and cheaper on gas then the 350.

Thanks peeps,
JR

CrashOverKill · 04-30-2008, 03:51 AM

Check out summit for mods. Or google TONS of small block parts available out there. The drive shaft leaking is just a seal Easy and cheap fix. As for switching to stick.......Most off roaders/Mudders/Rock Crawlers switch to automatics LOL But hey I loved driving sticks for years untill I got old.

gchemist · 04-30-2008, 04:03 AM

PM your e-mail address to me. I have diagrams of the NP205 and 208 transfer cases.

Burnout · 04-30-2008, 05:03 AM

You got mail! lol I'm still wondering on what motor to drop in tho. I might just rebuild the 305 and put that in. Any thaughts?

JR

84 400 · 04-30-2008, 05:56 PM

how bought some pictures? Could be your shaft length or stress on the joint that caused the leak. Do you have a CV drive shaft or normal?

04-30-2008, 03:47 AM	#1
Burnout Registered User Join Date: Apr 2007 Location: Canada Posts: 13	New jimmy owner! Evening boys, I've been on the site a while back when I was looking for a jimmy. Finally found one that I liked. Specs: '85 gmc jimmy 5.0 auto with 8'' of lift and 35's. It's been modified into a truck. Pretty sweet. I have a few questions tho. The driveshaft is leaking where it goes in the transfercase. Any reason? I'm thinking it's because the driving shaft is to short. Also I was thinking of switching out the auto for a stick. Anyone done this before? And last but not least, anyone know good performance mods for a 5.0? I like the 5.0. Nice power and cheaper on gas then the 350. Thanks peeps, JR

04-30-2008, 03:51 AM	#2
CrashOverKill Registered User Join Date: Apr 2008 Location: Sparta Michigan Posts: 18	Re: New jimmy owner! Check out summit for mods. Or google TONS of small block parts available out there. The drive shaft leaking is just a seal Easy and cheap fix. As for switching to stick.......Most off roaders/Mudders/Rock Crawlers switch to automatics LOL But hey I loved driving sticks for years untill I got old.

04-30-2008, 04:03 AM	#3
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: New jimmy owner! PM your e-mail address to me. I have diagrams of the NP205 and 208 transfer cases. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

04-30-2008, 05:03 AM	#4
Burnout Registered User Join Date: Apr 2007 Location: Canada Posts: 13	Re: New jimmy owner! You got mail! lol I'm still wondering on what motor to drop in tho. I might just rebuild the 305 and put that in. Any thaughts? JR

04-30-2008, 05:56 PM	#5
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: New jimmy owner! how bought some pictures? Could be your shaft length or stress on the joint that caused the leak. Do you have a CV drive shaft or normal? __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.