Powertrax No Slip locker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redhead69 · 04-14-2008, 12:39 AM

Bought the unit in march and had a shop install my new 3.73 gears and this unit. Something was noticeably wrong right away (2 runs down the 1/4), brought the truck home and removed the unit. It had a broken spacer.. Contacted Richmond gear and sent the unit to warranty department to inspect. They said it was installed incorrectly breaking the spacer and sent me a replacement part along with a new spring kit and is good to go. I am trying to run for points in the street bracket and couldnt waste time with the truck down so I installed a mini spool. So here it is for sale with the warranty inspection notes, claim #s etc for 375.00 shipped to the lower 48, more anywhere else. This is just over 100 bucks off what I just paid for it not including shipping. Reply to this thread with questions..
The summit part # is PWT-92-0788-3005

Thanks
eric

redhead69 · 04-19-2008, 02:46 AM

ttt.
http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m29
I will knock off 10% for members

redhead69 · 04-21-2008, 09:56 PM

Open to offers or trades

71chevytruckguy · 04-22-2008, 07:26 AM

well i got some stuff layin around. what are you needin? chris.

redhead69 · 04-23-2008, 02:22 AM

man where to start

Lowering springs, nitrous, good carbs and distributors, electric fan, Sbc go fast stuff, 3 pt seatbelts, 1st gen nova parts

71chevytruckguy · 04-23-2008, 04:28 AM

i got NIB edelbrock performer RPM intake for sbc, a new 15" electric fan, NIB auto trans cooler, re-man points distributors with about 100 miles on it, some muncie 4-speed parts, and probably some other stuff. any of that sound good? chris.

redhead69 · 04-23-2008, 04:58 AM

I could use the intake and what kind of electric fan is it.. any specs? I need a pretty good flowing fan to cool my 400sb.

71chevytruckguy · 04-24-2008, 06:19 AM

not to sure on the specs for the fan, let me do some research and ill get back to ya. chris.

71chevytruckguy · 05-02-2008, 06:04 AM

its a 16" torqflo. its the $70 one they sell at autozone. couldnt find any cfm specs. chris.

redhead69 · 05-02-2008, 06:45 AM

Sorry this sold pending payment to member truckmanloco.

71chevytruckguy · 05-06-2008, 07:21 PM

well dang. if it dont work, let me know. chris.

04-14-2008, 12:39 AM	#1
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Powertrax No Slip locker Bought the unit in march and had a shop install my new 3.73 gears and this unit. Something was noticeably wrong right away (2 runs down the 1/4), brought the truck home and removed the unit. It had a broken spacer.. Contacted Richmond gear and sent the unit to warranty department to inspect. They said it was installed incorrectly breaking the spacer and sent me a replacement part along with a new spring kit and is good to go. I am trying to run for points in the street bracket and couldnt waste time with the truck down so I installed a mini spool. So here it is for sale with the warranty inspection notes, claim #s etc for 375.00 shipped to the lower 48, more anywhere else. This is just over 100 bucks off what I just paid for it not including shipping. Reply to this thread with questions.. The summit part # is PWT-92-0788-3005 Thanks eric __________________ Currently truckless

04-19-2008, 02:46 AM	#2
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Powertrax No Slip locker ttt. http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m29 I will knock off 10% for members __________________ Currently truckless

04-21-2008, 09:56 PM	#3
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Powertrax No Slip locker Open to offers or trades __________________ Currently truckless

04-22-2008, 07:26 AM	#4
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Powertrax No Slip locker well i got some stuff layin around. what are you needin? chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

04-23-2008, 02:22 AM	#5
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Powertrax No Slip locker man where to start Lowering springs, nitrous, good carbs and distributors, electric fan, Sbc go fast stuff, 3 pt seatbelts, 1st gen nova parts __________________ Currently truckless

04-23-2008, 04:28 AM	#6
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Powertrax No Slip locker i got NIB edelbrock performer RPM intake for sbc, a new 15" electric fan, NIB auto trans cooler, re-man points distributors with about 100 miles on it, some muncie 4-speed parts, and probably some other stuff. any of that sound good? chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

04-23-2008, 04:58 AM	#7
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Powertrax No Slip locker I could use the intake and what kind of electric fan is it.. any specs? I need a pretty good flowing fan to cool my 400sb. __________________ Currently truckless

04-24-2008, 06:19 AM	#8
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Powertrax No Slip locker not to sure on the specs for the fan, let me do some research and ill get back to ya. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

05-02-2008, 06:04 AM	#9
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Powertrax No Slip locker its a 16" torqflo. its the $70 one they sell at autozone. couldnt find any cfm specs. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

05-02-2008, 06:45 AM	#10
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Powertrax No Slip locker Sorry this sold pending payment to member truckmanloco. __________________ Currently truckless

05-06-2008, 07:21 PM	#11
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Powertrax No Slip locker well dang. if it dont work, let me know. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.