Pwr. Steering Pump & Brkt's 250 6 Cyl.....

[toomanytoyz]

Pump & Brkts came off a Running 250 6 Cyl. in a 81 Chevy truck

$ 85.00 Shipped to USA

Respond in Post

Thanks, Rick

[toomanytoyz]

ttt

[BAGGERSOCAL]

I will take if it bolts up to a 68 Inline 6 250

[toomanytoyz]

Steve,

If your Motor is the Original , This is not a Direct Bolt up for it. This set-up is for the Intergrated Head 6 that was on Later Trucks...........

With that said, I did use a Set up like this on my Wrecker that has the old style 6 in it, I Notched the Back of the Bracket to Clear the Exhaust & Used a Bracket i had from a Camaro that i had laying around, I will attach some pics of how i did it for the Wrecker.

Thanks, Rick

[toomanytoyz]

In this Pic I marked the Area i Cut away & Used thie Bracket to mount it to the Frame, That took the place of the Bracket that is kind of angled & Mounted to Back of Pump & Then Lower on The Engine Block...................


The Yellow Lines are the Brkt i Used & Show the Area i Cut out, Sorry my Paint Skill is Lacking


Thanks, Rick

[toomanytoyz]

ttt