68 GMC C-10, Everything but Engine and Seats, Winfield, KS - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 05-05-2008, 01:13 AM

is the wiring harnass installed? or in a box?

68gmcjon · 05-05-2008, 01:36 AM

Wiring harness is installed

buffle · 05-05-2008, 04:14 AM

Just thought I would let you know. I am interested and do need that leaf spring rear end. I live approx. 3 hours from you.

68gmcjon · 05-05-2008, 04:23 AM

buffle--are you interested in the whole truck or just the dana??

buffle · 05-05-2008, 06:01 PM

Wish I had room, but the dana is what I am really interested in. Have you thought about a $

Sammy · 05-05-2008, 08:01 PM

Seriously interested in the underdash wiring harness if you part it. zip 63628. Thanks

68gmcjon · 05-05-2008, 08:31 PM

buffle--I'll think up a price for just the dana, I'd really rather not take it out unless I absolutely have to since I will have to replace it with something else to keep the truck rolling.

sammy--got you noted for the painless kit

68gmcjon · 05-07-2008, 01:44 AM

buffle--if I end up parting it I'll take $600 for the dana
detroit locker, new bearings ~2 years ago, 3.54 gears

buffle · 05-07-2008, 02:50 AM

Is it 5 on 5 or 6 lug? If 5 on 5 how soon do u want do this? I am in no hurry my 3/4 ton is fine until i get all the conversion parts.

*ksjh1316* · 05-07-2008, 05:24 AM

Let me know on the grill if the others pass I am just up the road from ya

68gmcjon · 05-07-2008, 05:39 AM

buffle--it's a 6 lug

ksjh--got you in line for the grill

buffle · 05-07-2008, 06:34 PM

I guess I will keep looking, need 5 on 5.

68gmcjon · 05-07-2008, 06:43 PM

sorry about that buffle, good luck finding one

Michael12 · 05-07-2008, 07:52 PM

How are the guages... I am interested in that.... I wish I could buy the whole truck from you but being a College student isn't the best occupation to be buying new trucks.

68gmcjon · 05-07-2008, 08:15 PM

Michael--I understand about the college thing, same reason I'm selling since I'm currently at K-State. Anyways, only stock gauge that works is the speedo, aftermarket tach, oil pres., vacuum, temp, gas gauge is there but was very sporadic

Zumo · 05-07-2008, 08:23 PM

Well I hope you find a buyer. That seems too nice to part.

Orange · 05-07-2008, 08:48 PM

With a price I'll jump in line on the drop spindles.

DLB

bguild · 05-08-2008, 05:33 PM

so are you parting this out?? I am in KC and might be interested in some stuff.

68gmcjon · 05-08-2008, 06:03 PM

I'm still holding out to sell as a whole truck, would rather not part b/c I don't want pieces lying around that don't sell

**lks dcvn** · 05-08-2008, 06:28 PM

I will get in line for the Painless kit if you decide to part out the truck...(pending price and pix).

Does it already have all the connections made (factory terminals added)?

Good luck on your sale...

bankone1 · 05-09-2008, 01:52 AM

could you please put me in line for the side trim the molding

68gmcjon · 05-09-2008, 06:16 AM

Painless kit has the factory ends for the headlights and such already put on

*FormerMember* · 05-09-2008, 04:22 PM

Ok, so whole truck price is?

Does that include the interior?

68gmcjon · 05-09-2008, 06:28 PM

2750 for the whole truck, complete interior except no seats, they're already sold

chucks70 · 05-10-2008, 04:05 AM

Would like the shift linkage for the TH400. I need everything from the column to the trans including the pivot that is attached to the frame.

05-05-2008, 01:13 AM	#26
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS is the wiring harnass installed? or in a box? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-05-2008, 01:36 AM	#27
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Wiring harness is installed __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-05-2008, 04:14 AM	#28
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Just thought I would let you know. I am interested and do need that leaf spring rear end. I live approx. 3 hours from you.

05-05-2008, 04:23 AM	#29
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS buffle--are you interested in the whole truck or just the dana?? __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-05-2008, 06:01 PM	#30
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Wish I had room, but the dana is what I am really interested in. Have you thought about a $

05-05-2008, 08:01 PM	#31
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Seriously interested in the underdash wiring harness if you part it. zip 63628. Thanks __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-05-2008, 08:31 PM	#32
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS buffle--I'll think up a price for just the dana, I'd really rather not take it out unless I absolutely have to since I will have to replace it with something else to keep the truck rolling. sammy--got you noted for the painless kit __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-07-2008, 01:44 AM	#33
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS buffle--if I end up parting it I'll take $600 for the dana detroit locker, new bearings ~2 years ago, 3.54 gears __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-07-2008, 02:50 AM	#34
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Is it 5 on 5 or 6 lug? If 5 on 5 how soon do u want do this? I am in no hurry my 3/4 ton is fine until i get all the conversion parts.

05-07-2008, 05:24 AM	#35
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Let me know on the grill if the others pass I am just up the road from ya

05-07-2008, 05:39 AM	#36
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS buffle--it's a 6 lug ksjh--got you in line for the grill __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-07-2008, 06:34 PM	#37
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS I guess I will keep looking, need 5 on 5.

05-07-2008, 06:43 PM	#38
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS sorry about that buffle, good luck finding one __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-07-2008, 07:52 PM	#39
Michael12 Registered User Join Date: Dec 2002 Location: Colorado Posts: 57	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS How are the guages... I am interested in that.... I wish I could buy the whole truck from you but being a College student isn't the best occupation to be buying new trucks.

05-07-2008, 08:15 PM	#40
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Michael--I understand about the college thing, same reason I'm selling since I'm currently at K-State. Anyways, only stock gauge that works is the speedo, aftermarket tach, oil pres., vacuum, temp, gas gauge is there but was very sporadic __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA



Register or Log In To remove these advertisements.

05-07-2008, 08:23 PM	#41
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Well I hope you find a buyer. That seems too nice to part. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

05-07-2008, 08:48 PM	#42
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS With a price I'll jump in line on the drop spindles. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

05-08-2008, 05:33 PM	#43
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS so are you parting this out?? I am in KC and might be interested in some stuff. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

05-08-2008, 06:03 PM	#44
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS I'm still holding out to sell as a whole truck, would rather not part b/c I don't want pieces lying around that don't sell __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-08-2008, 06:28 PM	#45
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,343	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS I will get in line for the Painless kit if you decide to part out the truck...(pending price and pix). Does it already have all the connections made (factory terminals added)? Good luck on your sale...

05-09-2008, 01:52 AM	#46
bankone1 Registered User Join Date: Aug 2006 Location: Oklahoma City Posts: 212	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS could you please put me in line for the side trim the molding

05-09-2008, 06:16 AM	#47
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Painless kit has the factory ends for the headlights and such already put on __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-09-2008, 04:22 PM	#48
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Ok, so whole truck price is? Does that include the interior? Last edited by FormerMember; 05-09-2008 at 04:22 PM.

05-09-2008, 06:28 PM	#49
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS 2750 for the whole truck, complete interior except no seats, they're already sold __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

05-10-2008, 04:05 AM	#50
chucks70 Registered User Join Date: Feb 2002 Location: Cadiz, OH Posts: 628	Re: 68 GMC C-10, Everything but Engine and Seats, Winfield, KS Would like the shift linkage for the TH400. I need everything from the column to the trans including the pivot that is attached to the frame. __________________ 68 1 ton dually 292, 2001 Sebring, 2004 Trailblazer, 11 Camaro Convertible.

Register or Log In To remove these advertisements.