Vortec 4200 In-line 6, 4.2 And 4l60 transmission - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OhNoJoe · 04-26-2008, 02:27 AM

Vortec 4200 In-line 6, 4.2 And 4l60 transmission, transfer case wiring harness (no CPM but may still be available) and all accessories (PS, A/C, Starter ect ect ) from a late model year 2002 Trailblazer.

I bought this engine and trans to drop into my 72 Burb and has been kept in my garage at home. However, I just don’t have the time or funds. The set-up has almost 50K miles clocked on it. It ran fine when pulled. However, it is being sold as is, where is.

The Trailblazer was struck on the right front but did not get into the engine. There is one ignition module and some other module was broken when it got hoisted in the pick-up which can be seen in the pictures.

I paid $250 for this set up, I drove a day to get it, spent $100 dollars in fuel and got my wife really mad at me. I can put it on a pallet and take to a terminal for a fee. However, all shipping costs and arrangement are up to the buyer. I can also load it on your pick-up for free or delivery it myself anywhere a few hours from Springfield Illinois for the fuel cost. You must have a way to unload it and buy me lunch.

The trans or the transfer case is going for more than I am asking, $300. I am also interested in a trade on a freshly or low mile rebuilt 292 long block that is year (72) appropriate. I am also trying to sell this locally so all the normal disclaimers apply.

My email address is OhNoJoe@comcast.net I will answer any questions.

This is a good deal for the right buyer.

http://s221.photobucket.com/albums/d...ec%204%20sale/

qksilver · 04-27-2008, 04:58 AM

I am interested but will know more on sunday. Trying to figure out some details.
Pm me, Steve. thanks

67_C-30 · 04-27-2008, 10:07 PM

I would love to see one those in a 67-72 so here's a bump for ya!

OhNoJoe · 05-10-2008, 03:36 PM

I got the pcm.

*FormerMember* · 05-10-2008, 04:01 PM

I am interested in this for a Jeep project.

Where is Springfield? I could have a truck come and get it.

OhNoJoe · 05-11-2008, 01:41 AM

I am about 1,216 mi – about 19 hours 39 mins from New Hampshire. Springfield Illinois is 3 hours south of Chicago 1 1/2 hours north east of St. louis. We have a new presidental Lincoln museam and other Lincoln stuff if you want to drive out. We also got an extra bedroom

04-26-2008, 02:27 AM	#1
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Vortec 4200 In-line 6, 4.2 And 4l60 transmission Vortec 4200 In-line 6, 4.2 And 4l60 transmission, transfer case wiring harness (no CPM but may still be available) and all accessories (PS, A/C, Starter ect ect ) from a late model year 2002 Trailblazer. I bought this engine and trans to drop into my 72 Burb and has been kept in my garage at home. However, I just don’t have the time or funds. The set-up has almost 50K miles clocked on it. It ran fine when pulled. However, it is being sold as is, where is. The Trailblazer was struck on the right front but did not get into the engine. There is one ignition module and some other module was broken when it got hoisted in the pick-up which can be seen in the pictures. I paid $250 for this set up, I drove a day to get it, spent $100 dollars in fuel and got my wife really mad at me. I can put it on a pallet and take to a terminal for a fee. However, all shipping costs and arrangement are up to the buyer. I can also load it on your pick-up for free or delivery it myself anywhere a few hours from Springfield Illinois for the fuel cost. You must have a way to unload it and buy me lunch. The trans or the transfer case is going for more than I am asking, $300. I am also interested in a trade on a freshly or low mile rebuilt 292 long block that is year (72) appropriate. I am also trying to sell this locally so all the normal disclaimers apply. My email address is OhNoJoe@comcast.net I will answer any questions. This is a good deal for the right buyer. http://s221.photobucket.com/albums/d...ec%204%20sale/

04-27-2008, 04:58 AM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Vortec 4200 In-line 6, 4.2 And 4l60 transmission I am interested but will know more on sunday. Trying to figure out some details. Pm me, Steve. thanks

04-27-2008, 10:07 PM	#3
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Vortec 4200 In-line 6, 4.2 And 4l60 transmission I would love to see one those in a 67-72 so here's a bump for ya! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

05-10-2008, 03:36 PM	#4
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Vortec 4200 In-line 6, 4.2 And 4l60 transmission I got the pcm.

05-10-2008, 04:01 PM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Vortec 4200 In-line 6, 4.2 And 4l60 transmission I am interested in this for a Jeep project. Where is Springfield? I could have a truck come and get it.

05-11-2008, 01:41 AM	#6
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: Vortec 4200 In-line 6, 4.2 And 4l60 transmission I am about 1,216 mi – about 19 hours 39 mins from New Hampshire. Springfield Illinois is 3 hours south of Chicago 1 1/2 hours north east of St. louis. We have a new presidental Lincoln museam and other Lincoln stuff if you want to drive out. We also got an extra bedroom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.