Height / Width info needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 05-13-2008, 11:19 PM

Can anyone tell me the factory height and width of the 60-66 trucks? C10 based. I have been searching and can't find anything.. Thanks in advance.

jonzcustomshop · 05-14-2008, 12:04 AM

you might find some info on here:
http://www.6066gmcguy.org/

Super73 · 05-14-2008, 12:58 AM

That is one place I looked and could not find anything

*LILRED66* · 05-14-2008, 06:14 AM

Quote:

Originally Posted by Super73

Can anyone tell me the factory height and width of the 60-66 trucks? C10 based. I have been searching and can't find anything.. Thanks in advance.

Lwb or swb? Fleetside or stepside?

Super73 · 05-14-2008, 06:32 AM

I would assume height and width would be the same regardless of a LB or SB and SS or FS but either way SB/FS..

*LILRED66* · 05-16-2008, 07:41 AM

Quote:

Originally Posted by Super73

I would assume height and width would be the same regardless of a LB or SB and SS or FS but either way SB/FS..

71-1/4" tall
78-3/4" wide

I mistakenly thought you were after weight, as well, but I see now you only asked for height and width. I hope this information is helpful...it is from my 1965 Chevrolet Truck Data Book.

05-13-2008, 11:19 PM	#1
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Height / Width info needed Can anyone tell me the factory height and width of the 60-66 trucks? C10 based. I have been searching and can't find anything.. Thanks in advance. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

05-14-2008, 12:04 AM	#2
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Height / Width info needed you might find some info on here: http://www.6066gmcguy.org/

05-14-2008, 12:58 AM	#3
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Height / Width info needed That is one place I looked and could not find anything __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

05-14-2008, 06:32 AM	#5
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Height / Width info needed I would assume height and width would be the same regardless of a LB or SB and SS or FS but either way SB/FS.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.