A/C bracket and headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLUE THUNDER · 05-12-2008, 04:23 PM

I'm sure someone out there has the answer. I ordered a pair of Headman headers for Ol yeller. I looked at the factory a/c bracket and realized its not gonna fit. Ithere an aftermarket bracket specifically designed for use with headers, or am I gonna have to grind the origional one to fit? BTW, the bracket i'm talking about is bolted to rt side exhaust manifold. Thanks, Mario.

LUV2XCLR8 · 05-12-2008, 05:36 PM

I'd custom fab ya bracket if it were me, it is under the compressor and
out of sight anyways so who will see it? (BTW - I have the same issue)

ABHaulR · 05-13-2008, 07:25 AM

yes they make a header/ac mount bracket. look into summit or paw. if i can find it ill take a pic and post it.
Dwayne

BLUE THUNDER · 05-14-2008, 05:51 AM

thanks, I'll keep an eye out for it.

red71cheyenne · 05-14-2008, 07:04 AM

You can also make your own from some 1/2 inch pipe. It moves the bracket out far enough so you only have to grind a little off of the factory bracket. Just cut two short pieces of pipe to square the bracket to the engine.

Livrat · 05-14-2008, 06:35 PM

I have one of the aftermarket brackets, I also have an original bracket that has been modified to fit headers. I will take some pictures today and post it so you can see what you are looking for..

BLUE THUNDER · 05-15-2008, 03:16 AM

Thanks, I'll be lookin' out for the pics.

DMACK · 05-16-2008, 02:38 AM

anyone know where the factory AC bracket bolts up to the block on the pass side of S/B 350 in 69 GMC P/U?

Livrat · 05-17-2008, 06:13 AM

Sorry it took me a day longer than I said to post
I Finally found the modified factory bracket among my stuff..
The first picture & second is the aftermarket lower rear AC bracket for use with headers,
The thrid is a factory bracket modified crudly to use headers and the lower is what is supposed to look like,

BLUE THUNDER · 05-18-2008, 11:55 PM

Thanks guys. Mario

05-12-2008, 04:23 PM	#1
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	A/C bracket and headers I'm sure someone out there has the answer. I ordered a pair of Headman headers for Ol yeller. I looked at the factory a/c bracket and realized its not gonna fit. Ithere an aftermarket bracket specifically designed for use with headers, or am I gonna have to grind the origional one to fit? BTW, the bracket i'm talking about is bolted to rt side exhaust manifold. Thanks, Mario.

05-12-2008, 05:36 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: A/C bracket and headers I'd custom fab ya bracket if it were me, it is under the compressor and out of sight anyways so who will see it? (BTW - I have the same issue) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-13-2008, 07:25 AM	#3
ABHaulR Registered User Join Date: Jun 2003 Location: West Valley City, Ut Posts: 311	Re: A/C bracket and headers yes they make a header/ac mount bracket. look into summit or paw. if i can find it ill take a pic and post it. Dwayne __________________ 72' GMC Suburban 10 1/2" of Lift, 40" Tires! Waiting for restoration 67' Chevy, What to do??? And Bad Ass American Bulldogs!

05-14-2008, 05:51 AM	#4
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: A/C bracket and headers thanks, I'll keep an eye out for it.

05-14-2008, 07:04 AM	#5
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: A/C bracket and headers You can also make your own from some 1/2 inch pipe. It moves the bracket out far enough so you only have to grind a little off of the factory bracket. Just cut two short pieces of pipe to square the bracket to the engine. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

05-14-2008, 06:35 PM	#6
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: A/C bracket and headers I have one of the aftermarket brackets, I also have an original bracket that has been modified to fit headers. I will take some pictures today and post it so you can see what you are looking for..

05-15-2008, 03:16 AM	#7
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: A/C bracket and headers Thanks, I'll be lookin' out for the pics.

05-16-2008, 02:38 AM	#8
DMACK Registered User Join Date: May 2008 Location: Renton, WA Posts: 1	Re: A/C bracket and headers anyone know where the factory AC bracket bolts up to the block on the pass side of S/B 350 in 69 GMC P/U?

05-17-2008, 06:13 AM	#9
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: A/C bracket and headers Sorry it took me a day longer than I said to post I Finally found the modified factory bracket among my stuff.. The first picture & second is the aftermarket lower rear AC bracket for use with headers, The thrid is a factory bracket modified crudly to use headers and the lower is what is supposed to look like, Attached Images Last edited by Livrat; 05-17-2008 at 06:13 AM.

05-18-2008, 11:55 PM	#10
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: A/C bracket and headers Thanks guys. Mario



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.