How do you get the front cab mount bolts loose? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Primered_69 · 05-19-2008, 01:35 AM

Got the nut off them but the bolt appears ro be welded on.

Thanks in advance

otsenre · 05-19-2008, 01:39 AM

It is welded on! leave it there and lift with it on, or if you need it off,grind spot weld off

**leddzepp** · 05-19-2008, 01:40 AM

Good luck! I had the same thing happen when I changed mine. It is probably permanently rusted inside the sleeve. I had to cut it off with an angle grinder.

**leddzepp** · 05-19-2008, 01:43 AM

I was assuming you wanted to change the bolt also. If that is not the case, then do what otsenre said.

05-19-2008, 01:35 AM	#1
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	How do you get the front cab mount bolts loose? Got the nut off them but the bolt appears ro be welded on. Thanks in advance __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

05-19-2008, 01:39 AM	#2
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: How do you get the front cab mount bolts loose? It is welded on! leave it there and lift with it on, or if you need it off,grind spot weld off

05-19-2008, 01:40 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: How do you get the front cab mount bolts loose? Good luck! I had the same thing happen when I changed mine. It is probably permanently rusted inside the sleeve. I had to cut it off with an angle grinder.

05-19-2008, 01:43 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: How do you get the front cab mount bolts loose? I was assuming you wanted to change the bolt also. If that is not the case, then do what otsenre said.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.