going to look at a truck need member help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70cstjr · 05-20-2008, 06:13 PM

Ok im not the smartest cookie in the jar, so i need some help
I know the truck isnt stock but just need some insight. Its a 69 4x4 with a 402bb and a 375 trans. i didnt know what kinda tranny that was if it was any good, the truck is 2500 bux, not much rust. it doesnt have the doors or the doghouse on. but all the parts are there, just not assymbled. thanks for any help this is a picture the guy sent me

**fine69** · 05-20-2008, 06:32 PM

Where is the truck at? I might be able to go with you to look at it. I know about these trucks.
Ask any member here.

70cstjr · 05-20-2008, 06:35 PM

its about an hour from you. it south on 75 till u get to 571 its in west milton only like 5 min from me..i know enough about these trucks ive just never heard about a 375 tranny in these trucks..that was my first concern, just kinda wondered about it, but thank you

ProStreet68SB · 05-20-2008, 08:18 PM

a 375 is going to be a th400 with a 350 tailshaft. So dont worry to much lol.

**special-K** · 05-21-2008, 04:54 AM

Huh,no tailshaft on a 4wd,so to speak.I can`t say i`ve ever seen a 375 in a 4wd.I think just from what you`ve told us that it sounds decent at that price.

05-20-2008, 06:13 PM	#1
70cstjr Registered User Join Date: Sep 2007 Location: laura, ohio Posts: 935	going to look at a truck need member help Ok im not the smartest cookie in the jar, so i need some help I know the truck isnt stock but just need some insight. Its a 69 4x4 with a 402bb and a 375 trans. i didnt know what kinda tranny that was if it was any good, the truck is 2500 bux, not much rust. it doesnt have the doors or the doghouse on. but all the parts are there, just not assymbled. thanks for any help this is a picture the guy sent me __________________ PROJECT CIRCUIT RIDER

05-20-2008, 06:32 PM	#2
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: going to look at a truck need member help Where is the truck at? I might be able to go with you to look at it. I know about these trucks. Ask any member here. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-20-2008, 06:35 PM	#3
70cstjr Registered User Join Date: Sep 2007 Location: laura, ohio Posts: 935	Re: going to look at a truck need member help its about an hour from you. it south on 75 till u get to 571 its in west milton only like 5 min from me..i know enough about these trucks ive just never heard about a 375 tranny in these trucks..that was my first concern, just kinda wondered about it, but thank you __________________ PROJECT CIRCUIT RIDER

05-20-2008, 08:18 PM	#4
ProStreet68SB The Engine Whisperer Join Date: Sep 2006 Location: Ohio Posts: 770	Re: going to look at a truck need member help a 375 is going to be a th400 with a 350 tailshaft. So dont worry to much lol.

05-21-2008, 04:54 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: going to look at a truck need member help Huh,no tailshaft on a 4wd,so to speak.I can`t say i`ve ever seen a 375 in a 4wd.I think just from what you`ve told us that it sounds decent at that price. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.