How do you guys run wires to your doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JayDubBlazer · 05-23-2008, 02:19 AM

I am going to reinstall the speakers that I had in my doors. What it the best way to send a signal to a speaker? For the future how did you guys run power to you power windows and locks? I don't want the wire to be kinked or anything and if a 12V signal is running through the wire I don't want it to spark.

DavesRide · 05-23-2008, 02:40 AM

You could rum a set of these http://www.streetrodstuff.com/Products/1553/ but you can't listen to your radio door speakers with door open. No more broken pinched wires though. David

Sinister · 05-23-2008, 02:50 AM

I just did this last week. I still gotta rattlecan the wires black. There's 2 sets of wire cause I have 2 sets of speakers in my doors. Works well. It might be possible to drill the hole inside the cab higher up, or lower and hide the wires with carpet.

LooseCannon · 05-23-2008, 03:44 AM

Quote:

Originally Posted by DavesRide

You could rum a set of these http://www.streetrodstuff.com/Products/1553/ but you can't listen to your radio door speakers with door open. No more broken pinched wires though. David

Those connectors are too cool.

streetstar · 05-23-2008, 04:38 AM

How about a little rubber bellows type conduit like your daily driver has (or would have if it had power windows and stuff) ?

JayDubBlazer · 05-23-2008, 06:20 AM

Quote:

Originally Posted by DavesRide

You could rum a set of these http://www.streetrodstuff.com/Products/1553/ but you can't listen to your radio door speakers with door open. No more broken pinched wires though. David

Those are pretty cool, they might work. I really don't have to worry about keeping the door open when the entire top is off.

05-23-2008, 02:19 AM	#1
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	How do you guys run wires to your doors I am going to reinstall the speakers that I had in my doors. What it the best way to send a signal to a speaker? For the future how did you guys run power to you power windows and locks? I don't want the wire to be kinked or anything and if a 12V signal is running through the wire I don't want it to spark. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT Last edited by JayDubBlazer; 05-23-2008 at 02:21 AM. Reason: spelling

05-23-2008, 02:40 AM	#2
DavesRide Registered User Join Date: Oct 2007 Location: Garageless, Missouri Posts: 408	Re: How do you guys run wires to your doors You could rum a set of these http://www.streetrodstuff.com/Products/1553/ but you can't listen to your radio door speakers with door open. No more broken pinched wires though. David __________________ R.I.P ESLL Even as the body dies the spirit lives on in the people you touched

05-23-2008, 02:50 AM	#3
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: How do you guys run wires to your doors I just did this last week. I still gotta rattlecan the wires black. There's 2 sets of wire cause I have 2 sets of speakers in my doors. Works well. It might be possible to drill the hole inside the cab higher up, or lower and hide the wires with carpet. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 05-23-2008 at 02:53 AM.

05-23-2008, 04:38 AM	#5
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: How do you guys run wires to your doors How about a little rubber bellows type conduit like your daily driver has (or would have if it had power windows and stuff) ? __________________ Are you retired too? Nonsense! I'm in my prime



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.