Nice CST Cab in Seattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ETsC10 · 04-23-2008, 06:56 PM

OK folks, I’ve STILL got the CST cab…

Bare cab---no doors, column, etc

Good drip rail/cowl/vent ducting/firewall/floor boards/door posts.
Low hump, non-air, Cargo light, Nice headliner with trim..
Straight and square.
Will need rust repair in some
of the lower portions.
Dash not cut. Clean paperwork.

The majority of it's uglies is both cab corners,
RH rocker, seam separated at LH kick panel
(but it appears quite sound/rust free

Still has 'official' Monroe bird poop!

$200. Please reply in thread...thanks! ET

**lks dcvn** · 04-23-2008, 07:44 PM

If you were closer - I would take it just to avoid the rust repairs...on the one in the back yard...

Good luck with your sale...

...By the way - I hate midwest rust...

dave666693 · 04-23-2008, 08:02 PM

Do you have a way to load it onto a trailer besides manpower? Is the windshield and back glass good? Any rust around the windshield?

ETsC10 · 04-23-2008, 08:43 PM

Dave, the area around the WS & door post is nice. I don't remember if the windshield glass has any damage or not.
Rear window is fine but the stainless trim is buggered in the lower DS.
There is a BIG cherrypicker but it would have to wait until after 4pm
or next sunday, monday or tuesday (my next days off) to achieve.

If you want to come take a look, I can meet you sometime today.

Number98 · 04-23-2008, 08:46 PM

This cab is making me mad!!!

You could have sold it 15 times if you were down here in the south......

I can not believe nobody has snagged it from you.

**COBALT** · 04-23-2008, 09:27 PM

If I had the $$$ and a work in progress I'd snag it in a second, and I wouldn't let the manpower winch get in the way.

LUV2XCLR8 · 04-24-2008, 12:14 AM

Damn, what a deal

CG · 04-24-2008, 01:58 AM

Ill take it (back) if you deliver it =)

Let me know.

Mark

bryanschevyparts · 04-24-2008, 02:02 AM

will you PLEASE ! sell me the HEADLINER TRIM ONLY ??

dave666693 · 04-24-2008, 03:06 AM

Quote:

Originally Posted by ETsC10

Whoops, here's a picture of the trim...

I am very interested. I am going out of town tomorrow and won't be back until Tuesday. I work in Tukwila so maybe I can take a look then. I go back out of town Wednesday and then again Monday.

I will contact you Tuesday. If you get a buyer between now and then go ahead and sell it.

CG · 04-24-2008, 08:42 AM

Ill wait on Daves answer for the cab. My son needed some money so I had him clean and organize the barn (man I had a lot of crap, there was still some stuff out there from Andys visit lol), anyway I have room for it now. Never know when I might need another decent cab.

ETsC10 · 05-26-2008, 11:42 PM

Sold to dave666693...nice to see this beauty will be resurrected!

Thanks All...ET

04-23-2008, 06:56 PM	#1
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Nice CST Cab in Seattle OK folks, I’ve STILL got the CST cab… Bare cab---no doors, column, etc Good drip rail/cowl/vent ducting/firewall/floor boards/door posts. Low hump, non-air, Cargo light, Nice headliner with trim.. Straight and square. Will need rust repair in some of the lower portions. Dash not cut. Clean paperwork. The majority of it's uglies is both cab corners, RH rocker, seam separated at LH kick panel (but it appears quite sound/rust free Still has 'official' Monroe bird poop! $200. Please reply in thread...thanks! ET Last edited by ETsC10; 05-22-2008 at 04:34 AM.

04-23-2008, 07:44 PM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Nice CST Cab in Seattle If you were closer - I would take it just to avoid the rust repairs...on the one in the back yard... Good luck with your sale... ...By the way - I hate midwest rust... Last edited by lks dcvn; 04-23-2008 at 07:44 PM.

04-23-2008, 08:02 PM	#3
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Nice CST Cab in Seattle Do you have a way to load it onto a trailer besides manpower? Is the windshield and back glass good? Any rust around the windshield? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

04-23-2008, 08:43 PM	#4
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Nice CST Cab in Seattle Dave, the area around the WS & door post is nice. I don't remember if the windshield glass has any damage or not. Rear window is fine but the stainless trim is buggered in the lower DS. There is a BIG cherrypicker but it would have to wait until after 4pm or next sunday, monday or tuesday (my next days off) to achieve. If you want to come take a look, I can meet you sometime today.

04-23-2008, 08:46 PM	#5
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: Nice CST Cab in Seattle *This cab is making me mad!!!* You could have sold it 15 times if you were down here in the south...... I can not believe nobody has snagged it from you.

04-23-2008, 09:27 PM	#6
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: Nice CST Cab in Seattle If I had the $$$ and a work in progress I'd snag it in a second, and I wouldn't let the manpower winch get in the way. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

04-24-2008, 12:14 AM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Nice CST Cab in Seattle Damn, what a deal __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-24-2008, 01:58 AM	#8
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Nice CST Cab in Seattle Ill take it (back) if you deliver it =) Let me know. Mark Last edited by CG; 04-24-2008 at 01:58 AM.

04-24-2008, 02:02 AM	#9
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: Nice CST Cab in Seattle will you PLEASE ! sell me the HEADLINER TRIM ONLY ??

04-24-2008, 08:42 AM	#11
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Nice CST Cab in Seattle Ill wait on Daves answer for the cab. My son needed some money so I had him clean and organize the barn (man I had a lot of crap, there was still some stuff out there from Andys visit lol), anyway I have room for it now. Never know when I might need another decent cab.

05-26-2008, 11:42 PM	#12
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Nice CST Cab in Seattle Sold to dave666693...nice to see this beauty will be resurrected! Thanks All...ET



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.