67 grill,seat and 3 speed column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clean67 · 05-21-2008, 05:48 AM

i have a 67 grill with turn signals,splash shield,rear support,hood latch,one trim ring(painted black) and bowtie $125 plus ship
also have a full depth foam seat $75 plus ship
67 3 speed column appears to have some new parts,with rods $75
Please respond in post,pms are for exchange of info
my zip is 23061
thanks greg

clean67 · 05-21-2008, 05:50 AM

one more

clean67 · 05-22-2008, 06:29 AM

pics

clean67 · 05-23-2008, 04:28 AM

Ok how about $50 for the column and $50 for the seat

**Hart_Rod** · 05-23-2008, 06:39 AM

Does the grill just have surface rust? Any dents? Shipping to 32571?

clean67 · 05-23-2008, 02:18 PM

hart_rod the grill is in very good shape,no dents or real rust.it has surface rust on the out side edges.the only problem with grill is i don't have nice trim rings for it.the top one is chrome painted black,the bottom one is steel and has some rust in it. It must have been put on the grill when the truck was painted,because the rest of the truck had all the chrome.but all in all it is a nice grill.will get closer pics,i can't seem to get it photographed well.i will check on shipping tonight
thanks greg

jkaylor68gmc · 05-23-2008, 03:40 PM

WIll you sell just the wheel off the column? WHat kind of shape is the wheel in, can it be repaired?

If so, how much, I need a factory style wheel.

clean67 · 05-23-2008, 06:06 PM

jkaylor yes i will sell just the wheel,will take pics tonight and post.i can't remember how bad the center is cracked.
thanks greg

clean67 · 05-24-2008, 03:05 AM

Hart_rod some more pics.i tried to get close ups of the worst looking places.still working on shipping, do you have a business address or home.Do you have a perfered shipper.

jkaylor some pics of the wheel

clean67 · 05-24-2008, 03:07 AM

pics

clean67 · 05-27-2008, 04:59 PM

jkaylor i have looked around here and can't find one any better. if you would like to have one to experiment with,just pay the shipping
thanks greg

clean67 · 05-27-2008, 05:09 PM

Hart-rod can do $150 shipped
thanks greg

clean67 · 05-29-2008, 02:07 AM

ttt

Conroe trucker · 05-30-2008, 03:56 AM

Can you shoot me a better pciture of the shift linkage?
I am interested inthe linkage only if you will seperate.

jkaylor68gmc · 05-30-2008, 04:10 AM

yeah, I will take the will for the shipping, I just need to be able to steer the truck.

clean67 · 05-30-2008, 06:01 AM

conroe what exactly do you want to see,will get pics,do you mean the two rods or the column linkage.

jkaylor pm sent

clean67 · 05-31-2008, 11:38 PM

conroe pm sent

05-21-2008, 05:48 AM	#1
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	67 grill,seat and 3 speed column i have a 67 grill with turn signals,splash shield,rear support,hood latch,one trim ring(painted black) and bowtie $125 plus ship also have a full depth foam seat $75 plus ship 67 3 speed column appears to have some new parts,with rods $75 Please respond in post,pms are for exchange of info my zip is 23061 thanks greg Attached Images __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-21-2008, 05:50 AM	#2
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column one more Attached Images __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-22-2008, 06:29 AM	#3
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column pics Attached Images __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-23-2008, 04:28 AM	#4
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column Ok how about $50 for the column and $50 for the seat __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-23-2008, 06:39 AM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 67 grill,seat and 3 speed column Does the grill just have surface rust? Any dents? Shipping to 32571? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-23-2008, 02:18 PM	#6
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column hart_rod the grill is in very good shape,no dents or real rust.it has surface rust on the out side edges.the only problem with grill is i don't have nice trim rings for it.the top one is chrome painted black,the bottom one is steel and has some rust in it. It must have been put on the grill when the truck was painted,because the rest of the truck had all the chrome.but all in all it is a nice grill.will get closer pics,i can't seem to get it photographed well.i will check on shipping tonight thanks greg __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-23-2008, 03:40 PM	#7
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 67 grill,seat and 3 speed column WIll you sell just the wheel off the column? WHat kind of shape is the wheel in, can it be repaired? If so, how much, I need a factory style wheel. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-23-2008, 06:06 PM	#8
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column jkaylor yes i will sell just the wheel,will take pics tonight and post.i can't remember how bad the center is cracked. thanks greg __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-24-2008, 03:05 AM	#9
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column Hart_rod some more pics.i tried to get close ups of the worst looking places.still working on shipping, do you have a business address or home.Do you have a perfered shipper. jkaylor some pics of the wheel Attached Images __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-24-2008, 03:07 AM	#10
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column pics Attached Images __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-27-2008, 04:59 PM	#11
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column jkaylor i have looked around here and can't find one any better. if you would like to have one to experiment with,just pay the shipping thanks greg __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-27-2008, 05:09 PM	#12
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column Hart-rod can do $150 shipped thanks greg __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-29-2008, 02:07 AM	#13
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column ttt __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-30-2008, 03:56 AM	#14
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: 67 grill,seat and 3 speed column Can you shoot me a better pciture of the shift linkage? I am interested inthe linkage only if you will seperate. __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

05-30-2008, 04:10 AM	#15
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 67 grill,seat and 3 speed column yeah, I will take the will for the shipping, I just need to be able to steer the truck. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride



Register or Log In To remove these advertisements.

05-30-2008, 06:01 AM	#16
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column conroe what exactly do you want to see,will get pics,do you mean the two rods or the column linkage. jkaylor pm sent __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

05-31-2008, 11:38 PM	#17
clean67 Registered User Join Date: Feb 2008 Location: Gloucester Va Posts: 157	Re: 67 grill,seat and 3 speed column conroe pm sent __________________ 67 Short Wide (My very first ride) 67 CST Custom Camper 67 Custom Camper 67 Suburban(Rust bucket)

Register or Log In To remove these advertisements.