Heat shield, jack and some other stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-30-2008, 06:41 AM

This all came off a 72 swb 2wd gmc
1st pic swb wiring from cab to rear of bed, good, and also rear taillight harness, one splice and missing drivers side marker wire $20 shipped
7 blade clutch fan $20 plus shipping
Oil filler tube $24 shipped
wood bed heat shield (72iron mike has dibs on this)
rad shroud clips $10 shipped
4 core upper and I also have the lower radiator holddowns $30 shipped for all 4
column wire connector for new style wire to old $10 shipped
jack and rod $20 plus shipping
AT frame piece $12 shipped
2nd pic
PB booster $40 plus shipping with all brackets
V8 motor stands $29 shipped
3rd pic
4 barrell carb with divorced choke $29 shipped
motor harness, one wire cut by starter $15 shipped
taillights and brackets and wiring $20 plus shipping
4th pic
Complete set up
air cleaner, spacer, tube and REAL GOOD heat shield, with exhaust manilold bolt too. The real deal complete and good just needs cleaned and painted. $80 plus shipping
Thanks Randy

**thelonerife** · 05-30-2008, 06:46 AM

how much for the wiring beside the fan? shipped to 37043?

chipflyer · 05-30-2008, 06:46 AM

Interested in that heat shield if its in nice shape Randy. Looks like you have been a busy man!

Jeff

teeitup · 05-30-2008, 07:00 AM

Thelonerife, $20 shipped for it all, the rear harness has a splice and is missing the drivers side marker wire. The wiring form cab to rear is good
Jeff, its real good. the best I've ever taken off, almost as good as the one on my 72 from Nevada

I'll be around Friday after work, come on over. Been a little busy, been putting a fence too and its been crazy at the course with all thsi rain, hard to keep up witht the grass, lol. Thanks Randy

chipflyer · 05-30-2008, 02:30 PM

I will swing by, I have a new daily driver to show ya, but you can't laugh.

Jeff

myoldchevytruck · 05-30-2008, 02:33 PM

Randy, Welcome Back.

Blade to Blade, how long is the fan w/clutch for $20.00? My shroud is just under 20 inches. If 17", how much shipped to 33024? Thanks, Harry

**nightmare** · 05-30-2008, 03:22 PM

Hey Randy, do you happen to have the end of the wiring harness that connects the tail lights to the wiring pictured? I'm looking for the end of the pigtail that holds into the frame and the end that goes inside of it from the tail light side. If so, how much for it shipped to 76180?

Bus Ted Knuckle · 05-30-2008, 03:25 PM

Randy, I want the carb. I lost your paypal info, can you pm it to me?

**D.PASSMORE** · 05-30-2008, 07:29 PM

Got the hardware from the manifolds?

teeitup · 05-30-2008, 07:35 PM

Chipflyer, Jeff, you wanting just the heat shield or all of it? I had another guy wanting it all, just let me know what all your wanting. New daily one huh, does it go farther on gas???

Myoldchevytruck, THANKS Harry, been a mess around here lately hard to do any truck stuff. I'll get a measurement after 2:30.
Nightmare, sorry thats the only one I have right now, I got another truck coming in that I will be parting.
Bus Ted, Bill, I'll pm you, its yours
D.Passmore, David, I have some of the bolts but not all of them
Thanks Randy

Luis_gz06 · 05-30-2008, 09:26 PM

Hey Randy, im interested in the air cleaner kit set up. Shipping to 89123.
Thanks, Luis.

**72 Super** · 05-31-2008, 03:29 AM

Randy, if it gets to me I would be interested in the heat shield and accessories.

Thanks,
Ray

chipflyer · 05-31-2008, 04:22 AM

The shield, pipe and special bolt if it is available Randy, I will be over sometime tomorrow evening.

Jeff

**thelonerife** · 05-31-2008, 05:20 AM

Okay Randy ,Ill take the wiring. I need your paypal.

**D.PASSMORE** · 05-31-2008, 03:23 PM

Randy,
I need an array of GM (OEM) Bolts/Studs from the Manifolds / intake-exhaust, water pump, A/C brackets hardware... Any small peices, ie - small clip that fits on water pump. If you get a chance lay out what you have, snap a few pictures, send them to me. David

chipflyer · 06-01-2008, 03:49 AM

I'm passing on the heat shield, its VERY nice but not the style I am after.

TTT

Jeff

49m · 06-01-2008, 04:07 AM

how much to ship power brakes setup to 40075? What year truck was it from

**thelonerife** · 06-01-2008, 04:32 AM

Randy do you have a set of heat shields that go under the rams horn manifolds to shield the sparkplug wires with no rust?

teeitup · 06-01-2008, 06:01 AM

David, I have alot of bolts and stuff I've taken off these trucks. I sold this motor to a local guy
49m, Its off a 72 1/2, all this stuff is from that truck. I'll try to get a quote Sat afternoon
thelonerife, Chuck, I have all the ones off this motor, I took them off before I sold the motor. $10 more and I can put them in the box with the wire.
Thanks Randy

**thelonerife** · 06-01-2008, 07:10 AM

Okay That sounds good I'll add 10.00 now.

myoldchevytruck · 06-01-2008, 03:15 PM

Randy, Anything on that fan/clutch? Size blade to blade? Shipping to 33024? Thanks, Harry

**70STOVEBOLT** · 06-01-2008, 03:59 PM

Randy, what diameter is that brake booster? I have an inline 6 and I need to have the smaller diameter (8"?) one. Put me in line if 49m passes.

Thanks,
Mark

teeitup · 06-01-2008, 04:12 PM

Guys I'm going to keep the heat shield for myself for a project, sorry
Thelonerife, Chuck, I'll get them in the box and will mailed out Mon, Thanks
Myoldchevytruck, Harry sorry I measured it and was going to pm you, its 18 inches, it had a original shroud on the truck, so its a original fan. I'll try to find a box today and get a quote for you
70stovebolt, Mark, its the smaller power brake booster not like the 3/4 tons. I'll let you know if he passes
Thanks Randy

**70STOVEBOLT** · 06-02-2008, 03:52 PM

Randy, I'll have to pass on the booster. Thanks, and TTT for you.

05-30-2008, 06:41 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Heat shield, jack and some other stuff This all came off a 72 swb 2wd gmc 1st pic swb wiring from cab to rear of bed, good, and also rear taillight harness, one splice and missing drivers side marker wire $20 shipped 7 blade clutch fan $20 plus shipping Oil filler tube $24 shipped wood bed heat shield (72iron mike has dibs on this) rad shroud clips $10 shipped 4 core upper and I also have the lower radiator holddowns $30 shipped for all 4 column wire connector for new style wire to old $10 shipped jack and rod $20 plus shipping AT frame piece $12 shipped 2nd pic PB booster $40 plus shipping with all brackets V8 motor stands $29 shipped 3rd pic 4 barrell carb with divorced choke $29 shipped motor harness, one wire cut by starter $15 shipped taillights and brackets and wiring $20 plus shipping 4th pic Complete set up air cleaner, spacer, tube and REAL GOOD heat shield, with exhaust manilold bolt too. The real deal complete and good just needs cleaned and painted. $80 plus shipping Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-02-2008 at 10:47 PM.

05-30-2008, 06:46 AM	#2
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Heat shield, jack and some other stuff how much for the wiring beside the fan? shipped to 37043? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

05-30-2008, 06:46 AM	#3
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat shield, jack and some other stuff Interested in that heat shield if its in nice shape Randy. Looks like you have been a busy man! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

05-30-2008, 07:00 AM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat shield, jack and some other stuff Thelonerife, $20 shipped for it all, the rear harness has a splice and is missing the drivers side marker wire. The wiring form cab to rear is good Jeff, its real good. the best I've ever taken off, almost as good as the one on my 72 from Nevada I'll be around Friday after work, come on over. Been a little busy, been putting a fence too and its been crazy at the course with all thsi rain, hard to keep up witht the grass, lol. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-30-2008 at 07:01 AM.

05-30-2008, 02:30 PM	#5
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat shield, jack and some other stuff I will swing by, I have a new daily driver to show ya, but you can't laugh. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

05-30-2008, 02:33 PM	#6
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Heat shield, jack and some other stuff Randy, Welcome Back. Blade to Blade, how long is the fan w/clutch for $20.00? My shroud is just under 20 inches. If 17", how much shipped to 33024? Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

05-30-2008, 03:25 PM	#8
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Heat shield, jack and some other stuff Randy, I want the carb. I lost your paypal info, can you pm it to me? __________________ Bill BEATERS ARE NEATER

05-30-2008, 07:29 PM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat shield, jack and some other stuff Got the hardware from the manifolds?

05-30-2008, 07:35 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat shield, jack and some other stuff Chipflyer, Jeff, you wanting just the heat shield or all of it? I had another guy wanting it all, just let me know what all your wanting. New daily one huh, does it go farther on gas??? Myoldchevytruck, THANKS Harry, been a mess around here lately hard to do any truck stuff. I'll get a measurement after 2:30. Nightmare, sorry thats the only one I have right now, I got another truck coming in that I will be parting. Bus Ted, Bill, I'll pm you, its yours D.Passmore, David, I have some of the bolts but not all of them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-30-2008, 09:26 PM	#11
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Heat shield, jack and some other stuff Hey Randy, im interested in the air cleaner kit set up. Shipping to 89123. Thanks, Luis. __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

05-31-2008, 03:29 AM	#12
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,686	Re: Heat shield, jack and some other stuff Randy, if it gets to me I would be interested in the heat shield and accessories. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-31-2008, 04:22 AM	#13
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat shield, jack and some other stuff The shield, pipe and special bolt if it is available Randy, I will be over sometime tomorrow evening. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

05-31-2008, 05:20 AM	#14
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Heat shield, jack and some other stuff Okay Randy ,Ill take the wiring. I need your paypal. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

05-31-2008, 03:23 PM	#15
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Heat shield, jack and some other stuff Randy, I need an array of GM (OEM) Bolts/Studs from the Manifolds / intake-exhaust, water pump, A/C brackets hardware... Any small peices, ie - small clip that fits on water pump. If you get a chance lay out what you have, snap a few pictures, send them to me. David

06-01-2008, 03:49 AM	#16
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Heat shield, jack and some other stuff I'm passing on the heat shield, its VERY nice but not the style I am after. TTT Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.



Register or Log In To remove these advertisements.

06-01-2008, 04:07 AM	#17
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: Heat shield, jack and some other stuff how much to ship power brakes setup to 40075? What year truck was it from __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

06-01-2008, 04:32 AM	#18
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Heat shield, jack and some other stuff Randy do you have a set of heat shields that go under the rams horn manifolds to shield the sparkplug wires with no rust? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

06-01-2008, 06:01 AM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat shield, jack and some other stuff David, I have alot of bolts and stuff I've taken off these trucks. I sold this motor to a local guy 49m, Its off a 72 1/2, all this stuff is from that truck. I'll try to get a quote Sat afternoon thelonerife, Chuck, I have all the ones off this motor, I took them off before I sold the motor. $10 more and I can put them in the box with the wire. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-01-2008, 07:10 AM	#20
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Heat shield, jack and some other stuff Okay That sounds good I'll add 10.00 now. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

06-01-2008, 03:15 PM	#21
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Heat shield, jack and some other stuff Randy, Anything on that fan/clutch? Size blade to blade? Shipping to 33024? Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

06-01-2008, 03:59 PM	#22
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: Heat shield, jack and some other stuff Randy, what diameter is that brake booster? I have an inline 6 and I need to have the smaller diameter (8"?) one. Put me in line if 49m passes. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-01-2008, 04:12 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Heat shield, jack and some other stuff Guys I'm going to keep the heat shield for myself for a project, sorry Thelonerife, Chuck, I'll get them in the box and will mailed out Mon, Thanks Myoldchevytruck, Harry sorry I measured it and was going to pm you, its 18 inches, it had a original shroud on the truck, so its a original fan. I'll try to find a box today and get a quote for you 70stovebolt, Mark, its the smaller power brake booster not like the 3/4 tons. I'll let you know if he passes Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-01-2008 at 04:31 PM.

06-02-2008, 03:52 PM	#24
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: Heat shield, jack and some other stuff Randy, I'll have to pass on the booster. Thanks, and TTT for you. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.